Start Here

How do you Change, Replace, or Install Broken 2000-2003 Nissan Maxima Side Marker Light Replacement

Fits years: 2000, 2001, 2002, 2003

All Nissan Maxima Turn Signal Lights for sale Tools required:
  • 10mm socket/ratchet

NOTE: In this project, we'll be removing the headlight assembly to access the side marker light. If you are replacing the marker light due to damage or wear, you may want to replace the headlight assembly, as well. You'll already be removing it, and it will never be easier than it is right now!

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the two 10mm mounting bolts located above the headlight assembly.

Step 3: Disconnect the headlight's wiring harness, and remove the headlight assembly from the vehicle.

Step 4: Disengage the clips that hold the side marker in place, and push it (from behind) out from its position in the bumper cover.

Step 5: Disconnect the wiring harness attached to the side marker light.

Step 6: Connect the wiring harness to the new side marker light and insert it into the bumper cover.

You will feel and hear the clips "snap" into position.

Step 7: Reconnect the headlight assembly's wiring harness, and mount it by tightening the 10mm mounting bolts.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003 Nissan Maxima Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
20 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.