Start Here

How do you Change, Replace, or Install Broken 2000-2004 Ford Focus Fog Light Replacement

Fits years: 2000, 2001, 2002, 2003, 2004

All Ford Focus Fog Lights for sale Tools required:
  • T20 Torx Driver

Step 1: From the front of the vehicle, reach into the lower grille and disengage the fog light's retaining arm.

This arm looks like a "sideways U". You can simply use your finger to push it away from the fog light assembly and it will "snap" back.

Step 2: You can now pull the fog light assembly from the vehicle.

Step 3: Disconnect the wiring harness from the back of the fog light assembly.

NOTE: Some models may not utilize the wiring harness. IF this is the case, simply turn the socket counter-clockwise and pull the bulb/socket from the assembly.

Step 4: Remove the locking mechanism (sideways U) from the vehicle, and attach it to the new fog light assembly.

Measure the alignment screw located on the side of the locking mechanism. Use the T20 Torx driver to remove the screw, and attach it to the new assembly. You can now add the spring and locking mechanism. Be sure that the screw length matches that of the old assembly, as this ensures proper alignment!

Step 5: Connect the wiring harness to the new fog light assembly and move the entire component into position.

Step 6: Re-engage the mounting mechanism to finalize the project.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Ford Focus Fog Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
31 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.