Start Here

How do you Change, Replace, or Install Broken 2000-2004 Subaru Outback Headlight Replacement

Fits years: 2000, 2001, 2002, 2003, 2004

All Subaru Outback Headlights for sale Tools required:
  • 10mm socket/ratchet

Step 1: Lift the vehicle's hood.

Step 2: Locate the three 10mm retaining bolts and remove them.

These bolts are located on the upper-outside region of the assembly (beneath the hood), the upper-interior region, and lower-interior region.

Step 3: You can now remove the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses from the back of the headlight assembly.

NOTE: If you purchased your replacement headlight from Go-Parts, it likely has the bulbs already included (as most of our models do), which saves you time! You can now move onto the installation of your new assembly.

Step 5: Connect the wiring harnesses to the back of the new headlight assembly and move it into place.

Step 6: Secure the headlight into place by tightening the three 10mm retaining bolts.

There are two adjusters on the back of the assembly. If you feel that you'd like to calibrate it, simply turn the light on, compare it to the other side, and adjust accordingly.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Subaru Outback Headlights Replacement Instructions

Average Rating: 5 of 5 stars
1 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.