Start Here

How do you Change, Replace, or Install Broken 2000-2005 Buick LeSabre Headlight Replacement

Fits years: 2000

All Buick LeSabre Headlights for sale Tools required:
  • 10mm socket/ratchet with extension

  • Flathead screwdriver

Step 1: Open the vehicle's hood.

Step 2: Remove the two 10mm bolts on the top of the headlight assembly.

Step 3: You can now pull the headlight assembly from the vehicle.

Step 4: Disconnect the parking/marker light.

NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs (as most of our models do). This saves you time and allows you to move straight to installation. However, if it doesn't, you can easily turn your sockets counter-clockwise, remove them from the old assembly, and insert them into the new one.

Step 5: Remove the side marker bulb harness from the old assembly and add it to the new one.

Step 6: Remove the plastic grommet from the insertion area, as the new assembly includes one!

Step 7: Connect the wiring harnesses and insert the marker light bulb into the new assembly and mount into place by tightening the two 10mm retaining bolts.
These Part Change / Installation Instructions Apply to:

00 2000 Buick LeSabre Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.