Start Here

How do you Change, Replace, or Install Broken 2000-2005 Buick LeSabre Tail Light Replacement

Fits years: 2000, 2001, 2002, 2003, 2004, 2005

All Buick LeSabre Tail Lights for sale Tools required:
  • 10mm wrench

Step 1: Open the vehicle's trunk.

Step 2: Remove the 2 mounting plugs that hold the plastic trunk panel in place. Remove the panel, exposing the mounting area.

Step 3: Remove the three 10mm mounting nuts that hold the tail light to the vehicle.

Step 4: You can now remove the tail light assembly.

Step 5: Disconnect the wiring harnesses from the back of the tail light assembly.

NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist the sockets counter-clockwise, remove them from the old assembly, and attach them to the new one. This process only takes a few moments!

Step 6: Connect the wiring harness to the new tail light assembly.

Step 7: Mount the tail light by tightening the 10mm bolts to the assembly's mounting studs.

Step 8: Cover the area with the plastic panel and secure it with the mounting plugs.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Buick LeSabre Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!

© 2015 GO-PARTS. All Rights Reserved.