Start Here

How do you Change, Replace, or Install Broken 2000-2005 Chevrolet Impala Headlight Replacement

Fits years: 2000, 2001, 2002, 2003, 2004, 2005

All Chevrolet Impala Headlights for sale Tools required:
  • Flathead screwdriver

Step 1: Lift the vehicle's hood.

Step 2: Using the flathead screwdriver, remove the clip that is located against the radiator.

Be sure to pull the middle of the clip out first, making it much easier to remove the entire clip.

Step 3: Remove the 2 retaining clips, one on each side of the headlight assembly.

The retaining clips are beige/white.

Step 4: Pull the headlight assembly out.

Step 5: Disconnect the electrical harness from the back of the assembly.

NOTE: If you ordered your part from Go-Parts, your headlight assembly will include all new bulbs. However, if you are only interested in replacing the bulbs, you can remove the back covers and pull the bulbs from the assembly for replacement.

Step 6: Connect the electrical harness to the new headlight assembly.

Step 7: Insert the new headlight assembly into place.

Step 8: Secure the white retaining clips into place.

When taking this step, be sure that they have FULLY locked into place - you don't want your headlight assembly flying out!

Step 9: Replace the clip that secures the panel covering the innermost retaining clip.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Chevrolet Impala Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.