Start Here

How do you Change, Replace, or Install Broken 2000-2005 Chevrolet Impala Serpentine Engine Belt Replacement

Fits years: 2000, 2001, 2002, 2003, 2004, 2005

All Chevrolet Impala for sale Tools required:

  • 10mm socket/ratchet

  • 13mm socket/ratchet

  • 8mm wrench

  • 15mm wrench

Step 1: Open the vehicle's hood.

Step 2: Using the 8mm wrench, disconnect the negative battery cable.

Step 3: Loosen and remove the 10mm (2) and 13mm bolts (2) that secure the coolant tank to the vehicle.

Step 4: You can now lift the coolant tank from its position. You DO NOT need to disconnect the hose!

Step 5: Using the 15mm socket/ratchet, turn the belt tensioner bolt (1) COUNTER CLOCKWISE to release the tension on the belt. Remove the belt from the vehicle, and SLOWLY release the tensioner back to its resting position.

Step 6: Using the serpentine belt routing diagram usually posted near the belt, on the UNDERSIDE of the hood, or in the owner's manual, route the NEW belt around the proper pulleys.

Step 7: Once the belt is in place, turn the 15mm belt tensioner bolt (1) CLOCKWISE to secure the belt's position.

NOTE: The belt should be taut, but not overly tight or stretched!

Step 8: Reattach the coolant tank by tightening the 13mm (2) and 10mm (2) bolts.

Step 9: Reconnect the negative battery cable.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Chevrolet Impala Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.