Start Here

How do you Change, Replace, or Install Broken 2001-2004 Dodge Stratus AC Heater Fan Speed Resistor Replacement

Fits years: 2001, 2002, 2003, 2004

All Dodge Stratus for sale Tools required:

  • 8mm socket/ratchet with extension

  • 5/8 socket/ratchet

NOTE: For this installation, we'll be working on the UNDERSIDE of the dashboard on the PASSENGER'S side of the vehicle (just below the glove compartment).

Step 1: Loosen and remove the 5/8 nuts (2) that secure the trim panel in place on the UNDERSIDE of the glove compartment.

Step 2: Remove this panel.

Step 3: Disconnect the speed resistor's wiring harness (1).

Step 4: Loosen and remove the 8mm mounting bolts (2) that secure the resistor to the blower motor assembly.

Step 5: You can now remove the resistor from the vehicle.

Step 6: Mount the new fan speed resistor by tightening the 8mm mounting bolts (2).

Step 7: Connect the wiring harness (1) to the new resistor.

Step 8: Reattach the lower trim panel by tightening the 5/8 bolts (2).
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004 Dodge Stratus Replacement Instructions

Average Rating: 4.9 of 5 stars
11 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.