Start Here

How do you Change, Replace, or Install Broken 2001-2004 Ford F-Series Super Duty Pickup Fog Light Replacement

Fits years: 2001, 2002, 2003, 2004

All for sale Tools required:
  • 8mm socket/ratchet with extension

  • Flathead screwdriver

  • Phillips screwdriver

Step 1: Loosen the three 8mm bolts that hold the fog light assembly in place.

One is on the bottom of the assembly and will require a 1" extension. The other two bolts are located on the top of the assembly.

Step 2: With the bolts removed, use the flathead screwdriver to release the retaining pins that hold the mount casing to the fog light.

Step 3: Using the screwdriver, remove the adjusting screw. Remove the mount casing.

Step 4: Disconnect the wiring harness from the back of the fog light assembly.

Step 5: Assemble the mounting bracket and fog light assembly AFTER you have put both parts "inside" the mounting area (otherwise, they won't fit).

Step 6: Attach the fog light assembly to the mounting bracket.

Step 7: Connect the wiring harness to the fog light, and mount it by tightening the three 8mm bolts.

NOTE: Lengthen or shorten the alignment stud to match that of the old assembly. This ensures proper beam alignment.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004 Replacement Instructions

Average Rating: 4.8 of 5 stars

Let your friends know this guide can help them!

© 2015 GO-PARTS. All Rights Reserved.