Start Here

How do you Change, Replace, or Install Broken 2001-2004 Toyota Tacoma Tail Light Replacement

Fits years: 2001, 2002, 2003, 2004

All Toyota Tacoma Tail Lights for sale Tools required:
  • Flathead screwdriver

  • Phillips screwdriver

Step 1: Loosen and remove the 4 Phillips retaining screws that hold the tail light assembly in place.

These screws are located along the outer edge of the tail light assembly.

Step 2: You can now pull the tail light assembly from the vehicle.

Step 3: Disconnect the tail light's wiring harness.

Step 4: Using the flathead screwdriver, pry the small retaining clips that are still in the vehicle' chassis.

These clips are often included with the new tail light assembly. We will have to remove the old ones, as ours will snap into place during installation.

Step 5: Connect the wiring harness to the new tail light assembly.

Step 6: Snap the tail light assembly into place. You will hear the clips "snap" into place.

Step 7: Tighten the 4 Phillips retaining screws to secure the tail light.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004 Toyota Tacoma Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
49 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.