Start Here

How do you Change, Replace, or Install Broken 2001-2005 Honda Civic Front Door Panel Replacement

Fits years: 2001, 2002, 2003, 2004, 2005

All Honda Civic for sale Tools required:

  • Phillips screwdriver

  • Flathead screwdriver (small)

  • Door Panel Clip Tool (or putty knife)

Step 1: Open the vehicle's door.

Step 2: Pry and remove the small trim panel that covers the side mirror's mounting area.

Step 3: Pry and remove the screw cover inside the interior door handle, exposing a Phillip screw (1). Loosen and remove this screw.

Step 4: Pry and remove the trim panel on the underside of the window control switch-plate, exposing Phillips screws (2). Loosen and remove these screws.

Step 5: Pry and remove the interior door handle's bezel. Disconnect the wiring harness (1) attached to the back of the bezel.

Step 6: Disconnect the power window switch-plate's wiring harness (1).

Step 7: Using the door panel clip tool (or putty knife), pry and remove the interior door panel from the vehicle.

A series of retaining clips hold the interior door panel to the vehicle. As you slide your tool between the panel and the frame, you'll feel each clip. When you do, pry outward to disengage it.

Step 8: You can now lift and remove the interior door panel.

Step 9: To reattach the interior door panel, re-engage the retaining clips with a firm "strike" near each clip.

Step 10: Tighten the Phillips screws, reattach the wiring harnesses, and reattach all trim panels to complete the project.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Honda Civic Replacement Instructions

Average Rating: 4.9 of 5 stars
44 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.