Start Here

How do you Change, Replace, or Install Broken 2001-2006 Dodge Stratus AC Heater Blower Motor Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006

All Dodge Stratus Blower Motor for sale Tools required:
  • 8mm socket/ratchet with extension

  • 5/8 socket/ratchet

Step 1: Beneath the glove compartment on the passenger's side, remove the two 5/8 nuts that hold the panel in place. Remove the panel.

Step 2: Disconnect the blower motor's wiring harness.

Step 3: Loosen and remove the three 8mm retaining bolts that hold the blower motor in place.

Step 4: You can now pull the blower motor from the vehicle.

Step 5: Insert the blower motor into place, using the triangular edge as your guide.

Step 6: Tighten the three 8mm retaining bolts to secure the component.

Step 7: Connect the blower motor's wiring harness.

Step 8: Reattach the trim panel that covers the area by tightening the two 5/8 bolts.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006 Dodge Stratus Blower Motor Replacement Instructions

Average Rating: 4.9 of 5 stars
11 Review(s)

Let your friends know this guide can help them!

© 2015 GO-PARTS. All Rights Reserved.