Start Here

How do you Change, Replace, or Install Broken 2001-2007 Dodge Caravan, Chrysler Town & Country, Plymouth Voyager Turn Signal Switch Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Dodge Caravan for sale Tools required:

  • Phillips screwdriver

  • Flathead screwdriver (small)

Step 1: Loosen and remove the Phillips screws (3) on the underside of the steering column.

Step 2: Separate the UPPER and LOWER trim panels surrounding the steering column and remove them.

They are held together by retaining clips built into the molding. It will take a FIRM tug to separate them, but be careful not to break the clips!

Step 3: Using the small flathead screwdriver, depress the retaining tab to release the wiring harness (1).

Step 4: Loosen and remove the Phillips screws (2) that hold the switch to the steering column.

Step 5: You can now remove the switch from the vehicle.

Step 6: Mount the new turn signal switch to the steering column by tightening the Phillips screws (2).

Step 7: Connect the wiring harness to the turn signal switch.

Step 8: Reattach the UPPER and LOWER trim panels to the steering column.

Step 9: Tighten the Phillips screws (3) to hold the trim panels in place.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Dodge Caravan Replacement Instructions

Average Rating: 4.8 of 5 stars
4 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.