Start Here

How do you Change, Replace, or Install Broken 2001-2007 Toyota Sequoia Fog Light Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Toyota Sequoia Fog Lights for sale Tools required:
  • 10mm socket/ratchet

  • Flathead screwdriver

  • Pliers

Step 1: From underneath the vehicle, remove the three 10mm bolts that hold the plastic panel in place.

This panel covers the fog light mounting area.

Step 2: Disconnect the fog light's wiring harness.

Step 3: Using the flathead screwdriver, gently pry the sides of the fog light assembly outward until you hear the clips disengage.

Step 4: Using the pliers, depress the locking tab, and push the assembly through the FRONT of the vehicle.

NOTE: Adjust your fog light's beam by lengthening or shortening the adjustment stud to match that of the old assembly.

Step 5: Insert the new fog light assembly through the front of the vehicle. By pushing the fog light into position, you should feel the locking tabs engage, securing the assembly.

Step 6: Connect the fog light's wiring harness.

Step 7: Reattach the protective panel by tightening the 10mm bolts that hold it in place.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Toyota Sequoia Fog Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
47 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.