Start Here

How do you Change, Replace, or Install Broken 2001-2008 Chrysler, Dodge Caravan, Town and Country Rear Power Vent Window Motor Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008

All Dodge Caravan for sale Tools required:

  • 10mm socket/ratchet with extension

  • 15mm socket/ratchet with extension

  • Flathead screwdriver

  • Pliers

Step 1: Open the vehicle's REAR hatch door.

Step 2: Loosen and remove the 15mm bolt (1) just above the seat belt's mounting point. You can now lower the seat belt harness.

Step 3: Pry and remove the trim that lines the BOTTOM of the door jamb.

Step 4: Pry and remove the trim that lines the TOP of the door jamb.

Step 5: Pry and remove the trim that lines the SIDE of the door jamb.

Step 6: Using the flathead screwdriver, pry and disengage the retaining pin (1) that secures the assembly to the window.

Step 7: Loosen and remove the 10mm bolts (3) that secure the motor assembly to the vehicle. Disconnect the assembly's wiring harness (1).

Step 8: Connect the wiring harness (1) to the new motor assembly. Secure it to the vehicle by tightening the 10mm bolts (3).

Step 9: Engage the retaining clip (1) to secure the assembly to the window.

Step 10: Reattach the trim panels (3).

Step 11: Secure the seatbelt assembly by tightening the 10mm bolt (1).
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008 Dodge Caravan Replacement Instructions

Average Rating: 4.8 of 5 stars
4 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.