Start Here

How do you Change, Replace, or Install Broken 2001-2011 Ford Ranger Parking Light Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

All Ford Ranger Turn Signal Lights for sale Tools required:
  • 6 mm socket/ratchet

Step 1: Lift the vehicle's hood.

Step 2: Disengage the two retaining clips located on the top of the headlight assembly.

Step 3: You can now pull the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses on the back of the headlight assembly to completely remove it.

Step 5: Loosen the two 6mm retaining bolts that hold the parking light assembly in place.

Step 6: You can now pull the parking light assembly from the vehicle.

Step 7: Disconnect the wiring harness from the back of the parking light.

Step 8: Connect the wiring harness to the back of the new parking light assembly and move it into place.

Step 9: Secure the parking light by tightening the two 6mm retaining bolts.

Step 10: Reattach the headlight wiring harnesses and lock it into place by engaging the two retaining clips.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010, 11 2011 Ford Ranger Turn Signal Lights Replacement Instructions

Average Rating: 4.8 of 5 stars
48 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.