Start Here

How do you Change, Replace, or Install Broken 2002-2006 Honda CR-V Interior Door Handle Replacement

Fits years: 2002, 2003, 2004, 2005, 2006

All Honda CR-V for sale Tools required:
  • Flathead screwdriver (small)

  • Phillips screwdriver


Step 1: Open the vehicle's door.

Step 2: Using the flathead screwdriver, pry and remove the small panel inside the interior door handle.

Step 3: Loosen and remove the Phillips screws (2) that are behind the panel we removed in Step 2.

Step 4: Pry and pull the interior door handle from the door.

Step 5: Disconnect the wiring harness from the back of the interior door handle.

Step 6: Disengage the clip that holds the locking rod to the interior door handle.


NOTE: If you ordered your replacement door handle from Go-Parts, it likely includes a new power lock switch, as most of our parts are all-inclusive. However, if your particular model does not include the switch, loosen and remove the Phillips screws (2) that hold the switch to the handle and attach it to the new one.

Step 7: Connect the wiring harness to the back of the interior door handle.

Step 8: Re-engage the clip that secures the locking rod to the interior door handle.

Step 9: Mount the interior door handle by tightening the Phillips screws (2).

Step 10: Cover the area by reattaching the small trim panel inside the interior door handle.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005, 06 2006 Honda CR-V Replacement Instructions

Average Rating: 4.9 of 5 stars
46 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.