Start Here

How do you Change, Replace, or Install Broken 2002-2006 Honda CR-V Rear Door Panel (Interior) Replacement

Fits years: 2002, 2003, 2004, 2005, 2006

All Honda CR-V for sale Tools required:

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Open the vehicle's REAR door.

Step 2: Pry and remove the trim panel inside the interior door handle. Loosen and remove the Phillips screws (2).

Step 3: Loosen and remove the Phillips screws (2) UNDER the interior door pull handle.

Step 4: Pry and life the power window control panel. Disconnect the wiring harness (1).

Step 5: Pry and remove the triangular trim panel near the window. Disengage the retaining pin beside the trim panel.

Step 6: Pry and remove the interior door handle. Disengage the locking rod from the back of the handle.

Step 7: Pry and separate the interior door panel from the frame.

A series of retaining clips secures the panel to the door frame. Work your way around the outer edge of the panel, prying outward, and "popping" the clips free.

Step 8: Disengage the locking rod from the back of the interior door panel.

Step 9: The panel should now be completely free from the vehicle.

Step 10: To reattach the interior door panel, simply reverse the removal process.

Engage the locking rod to the back of the interior door panel. "Snap" the panel back onto the door by firmly striking near each retaining clip. Re-engage and attach the interior door handle, connect all wiring harnesses, and be sure that all trim panels are reattached.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005, 06 2006 Honda CR-V Replacement Instructions

Average Rating: 4.9 of 5 stars
46 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.