Start Here

How do you Change, Replace, or Install Broken 2002-2006 Toyota Camry Headlight

Fits years: 2002, 2003, 2004

All Toyota Camry Headlights for sale Tools required:
  • Flathead screwdriver

  • 10mm socket

Step 1: Using the 10mm socket, remove the 3 retaining bolts that hold the headlight casing in place.

Step 2: Remove the clip located at the center of the vehicle's bumper cover.

Step 3: Remove the clips located in the wheel wells.

Step 4: Remove the 10mm bolts located in the wheel wells to allow for separation of the bumper cover and the headlight casing.

Step 5: Locate the 10mm bolt that is just below the headlight casing (behind the bumper cover) and remove it.

Step 6: Using the screwdriver, pop the headlight casing from the vehicle.

Step 7: Disconnect the electrical harnesses that powers the headlight.

NOTE: If you purchased your replacement headlight from Go-Parts, your replacement light will be complete with new bulbs. This will help you save steps regarding bulb replacement.

Step 8: Line-up the small clip on the interior of the headlight casing of the vehicle, and use it to line up the headlight upon installation.

Step 9: Reconnect all of the electrical harnesses.

Step 10: Pull the bumper cover out from the vehicle a bit to allow for final positioning of the replacement light.

Step 11: Reattach the bolts and clips that hold the bumper cover in place.

Step 12: Finalize the installation by tightening all of the 10mm bolts that hold the headlight in place.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004 Toyota Camry Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.