Start Here

How do you Change, Replace, or Install Broken 2002-2008 Dodge Ram Pickup Rear Gate Handle Replacement

Fits years: 2002, 2003, 2004, 2005, 2006, 2007, 2008

All Dodge Ram 3500 for sale Tools required:
  • T30 Torx Driver

  • 8mm socket/ratchet with extension


Step 1: Open the vehicle's tailgate.

Step 2: Loosen and remove the T30 Torx screws (8) from the tailgate.

Step 3: Remove the T30 screws (2) that hold the tailgate access panel in place.

Step 4: Pry and release the locking rod retaining clips (2). Disengage the rods.

Step 5: Loosen and remove the 8mm mounting bolts (2).

Step 6: You can now remove the tailgate handle assembly.

Step 7: Attach the new tailgate handle by tightening the 8mm mounting bolts (2).

Step 8: Engage the locking rod retaining clips (2).

Step 9: Tighten the T30 screws (2) that hold the tailgate access panel in place.

Step 10: Tighten the T30 Torx screws (8) that run the length of the tailgate panel.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008 Dodge Ram 3500 Replacement Instructions

Average Rating: 4.9 of 5 stars
21 Review(s)

Let your friends know this guide can help them!



Contact


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.