Start Here

How do you Change, Replace, or Install Broken 2003-2005 Chevrolet Cavalier Headlight Replacement

Fits years: 2003, 2004, 2005

All Chevrolet Cavalier Headlights for sale Tools required:
  • 13mm socket/ratchet

  • Flathead screwdriver

Step 1: Lift the vehicle's hood.

Step 2: Remove the 6 retaining clips that hold the protective panel over the radiator area.

By lifting the center of the clip, you can pull them from the vehicle.

Step 3: Loosen and remove the two 13mm mounting bolts that hold the headlight in place.

Step 4: You can now pull the headlight assembly from the vehicle.

Step 5: Disconnect the headlight's wiring harness.

NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply transfer the bulbs and sockets to the new assembly. This process takes just a few moments!

Step 6: Connect the wiring harness to the new headlight assembly.

Step 7: Mount the headlight by tightening the 13mm mounting bolts.

Use the guiding pin to ensure proper positioning.

Step 8: Reattach the protective panel by re-engaging the retaining clips.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005 Chevrolet Cavalier Headlights Replacement Instructions

Average Rating: 5 of 5 stars
11 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.