Start Here

How do you Change, Replace, or Install Broken 2003-2007 Nissan Murano Radiator Grille Replacement

Fits years: 2003, 2004, 2005, 2006, 2007

All Nissan Murano for sale Tools required:

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the Phillips retaining pins (8) that hold the trim panels (2) over the headlight assemblies.

There are 4 pins on each side!

Step 3: Disengage the retaining clips (7) that line the top of the radiator grille.

To remove these retaining clips, pry the center with a flathead screwdriver and pull the clip from the vehicle.

Step 4: Lift the tabs (2) on the backside of the grille while pull the grille from the front of the vehicle.

Step 5: Loosen and remove the Phillips screws (2) that hold the vehicle emblem to the grille. Mount this emblem to the new grille.

Step 6: Slide the new grille into position, using the retaining tabs as your guides. It should "snap" into place.

Step 7: Re-engage the retaining clips (7) that line the top of the grille to secure it to the vehicle.

Step 8: Reattach the trim panels (2) that cover the headlight assemblies by re-engaging the Phillips retaining pins (8).
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Nissan Murano Replacement Instructions

Average Rating: 5 of 5 stars
21 Review(s)

Let your friends know this guide can help them!

© 2015 GO-PARTS. All Rights Reserved.