Start Here

How do you Change, Replace, or Install Broken 2003-2007 Saturn Ion Power Window Switch Replacement

Fits years: 2003, 2004, 2005, 2006, 2007

All Saturn Ion for sale Tools required:

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Open the vehicle's door.

Step 2: Loosen and remove the Phillips screws (2) inside the interior door pull.

Step 3: Using the flathead screwdriver, pry and remove the power mirror switch. Disconnect the wiring harness attached to the underside of the switch.

Step 4: Lift and remove the window control switch-plate.

Step 5: Disconnect the wiring harnesses (2) from the underside of the switch-plate.

Step 6: Using the flathead screwdriver, GENTLY pry the retaining tabs to remove the power window switch.

Step 7: "Snap" the new power window switch into the switch-plate.

Step 8: Connect the wiring harnesses (2) to the underside of the window control switch.

Step 9: Reattach the switch-plate by tightening the Phillips screws (2).

Step 10: Reconnect the wiring harness for the power mirror switch, and "snap" it back into position on the switch-plate.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Saturn Ion Replacement Instructions

Average Rating: 4.9 of 5 stars
10 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.