Start Here

How do you Change, Replace, or Install Broken 2003-2007 Saturn Ion Rear Door Panel (Interior) Replacement

Fits years: 2003, 2004, 2005, 2006, 2007

All Saturn Ion for sale Tools required:

  • Phillips screwdriver

  • Flathead screwdriver

  • Door Panel Clip Tool (or putty knife)

Step 1: Open the vehicle's REAR door.

Step 2: Loosen and remove the Phillips screws (2) inside the interior door pull.

Step 3: Lift and remove the power window control panel. Disconnect the wiring harness (1) from the UNDERSIDE of the panel.

Step 4: Disengage and remove the retaining pins (2) near the DOOR LATCH on the interior door panel.

To disengage these retaining pins, pry out on the center of the pin, and pull it from the panel.

Step 5: Using the door panel clip tool (or putty knife), pry and separate the interior door panel from the door frame.

A series of retaining clips secures the door panel to the frame. By working your way around the outer edge of the panel, you will feel each clip. When you do, pry outward to "pop" them free.

Step 6: The panel should now be free from the door frame.

Step 7: To reattach the interior door panel, simply reverse the removal process.

Using a FIRM, but not too firm, strike near each retaining clip, "pop" them back into place. Connect the wiring harness, and snap the control panel back into place. Also, be sure to re-engage the retaining pins near the DOOR LATCH.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Saturn Ion Replacement Instructions

Average Rating: 4.9 of 5 stars
10 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.