Start Here

How do you Change, Replace, or Install Broken 2003-2010 Ford Crown Victoria, Lincoln Town Car, Grand Marquis, Marauder Wiper Switch Replacement

Fits years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

All Ford Crown Victoria for sale Tools required:

  • 7mm socket/ratchet

  • 8mm socket/ratchet

  • 10mm socket/ratchet

  • T20 Torx Driver

  • Phillips screwdriver

  • Flathead screwdriver

  • Adjustable wrench

Step 1: Open the vehicle's hood. Disconnect the negative battery cable.

Step 2: Using a screwdriver, depress the button on the UNDERSIDE of the steering column while turning the key to the RUN position. This will allow you to pull the locking cylinder from the steering column.

Step 3: Using the adjustable wrench, remove the TILT lever from the steering column.

Step 4: Loosen and remove the 7mm bolts (2) on the UNDERSIDE of the bottom dash panel (near the parking handle). You can remove the handle, and pry and remove the trim panel.

Step 5: Loosen and remove the 10mm bolts (5) that secure the metal panel to the UNDERSIDE of the dash. Remove this panel.

Step 6: Loosen and remove the Phillips screws (4) that secure the lower steering column trim panel to the column. You can now remove this panel.

Step 7: Loosen and remove the T20 Torx screws (2) that secure the wiper switch to the steering column. You can now remove the switch from the vehicle. Disconnect the wiring harnesses (3).

Step 8: Connect the NEW wiper switch's wiring harnesses (3) and mount it by tightening the T20 Torx screws (2).

Step 9: Reattach the steering column's lower trim panel by tightening the Phillips screws (4).

Step 10: Reattach the metal plate to the UNDERSIDE of the dash by tightening the 10mm bolts (5).

Step 11: Reattach the parking handle and lower trim panel by tightening the 7mm bolts (2).

Step 12: Reattach the TILT lever to the steering column.

Step 13: Insert the locking cylinder into the steering column. It should "snap" into place.

Step 14: Reconnect the negative battery cable.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010 Ford Crown Victoria Replacement Instructions

Average Rating: 4.9 of 5 stars
45 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.