Start Here

How do you Change, Replace, or Install Broken 2004-2008 Nissan Maxima Tail Light Replacement

Fits years: 2004, 2005, 2006, 2007, 2008

All Nissan Maxima Tail Lights for sale Tools required:
  • 8mm socket/ratchet

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Open the vehicle's trunk.

Step 2: Using the flathead screwdriver, remove the two clips that hold the trunk liner in place (over the back of the tail light assembly).

Step 3: Pull the trunk liner back to expose the back of the tail light assembly.

Step 4: Disconnect the wiring harness.

Step 5: Remove the two 8mm retaining bolts that secure the tail light to the vehicle.

Step 6: Push the rubber plug through the hole it covers and pull the tail light assembly from the back of the vehicle.

Step 7: Remove the four Phillips screws that secure the colored trim panel from the old assembly and attach it to the new assembly.

Step 8: Unscrew the bulbs/sockets from the old tail light assembly and attach them to the new assembly.

Step 9: Using the guiding tabs, attach the new tail light assembly to the vehicle.

Step 10: Secure the assembly in place by tightening the 8mm retaining bolts.

Step 11: Connect the wiring harness.

Step 12: Replace the trunk liner and secure it into place by re-engaging the clips.

The liner will go UNDERNEATH the plastic protective plate in the trunk.
These Part Change / Installation Instructions Apply to:

04 2004, 05 2005, 06 2006, 07 2007, 08 2008 Nissan Maxima Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
20 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.