Start Here

How do you Change, Replace, or Install Broken 2004-2009 Dodge Durango Side Mirror Replacement

Fits years: 2004, 2005, 2006, 2007, 2008, 2009

All Dodge Durango Mirrors for sale Tools required:
  • Small flathead screwdriver

  • Phillips screwdriver

  • 10mm socket or wrench

Step 1: Using the small flathead screwdriver, gently pry the electronic control panel away from the interior door panel.

Step 2: Disconnect the wiring harnesses attached to it and remove it completely.

Step 3: Using the flathead screwdriver and then your Phillips screwdriver, remove the panel that is behind your interior door handle.

Step 4: With the Phillips screwdriver, remove the two screws at the bottom of the interior door panel.

Step 5: Disconnect the blue clip on the back of the interior door panel and remove the panel entirely.

Step 6: Disconnect the wiring harness attached to the mirror.

Step 7: Remove the three 10mm nuts that hold the mirror in place.

Step 8: Remove the old mirror from the vehicle.

Step 9: Install the new mirror and tighten the bolts to secure its position.

Step 10: Reconnect the electrical harness to ensure proper mirror function.

Step 11: Reattach your interior door panel.

Be sure that you reconnect all of the electrical harnesses, as you don't want to take the panel off again for quite some time!
These Part Change / Installation Instructions Apply to:

04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009 Dodge Durango Mirrors Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.