Start Here

How do you Change, Replace, or Install Broken 2005-2005 Honda Accord Tail Light Replacement

Fits years: 2005

All Honda Accord Tail Lights for sale Tools required:
  • 10mm socket/ratchet

  • 8mm socket/ratchet

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Lift the trunk and locate the small bolt covers near the back panel trim.

Step 2: Remove the bolt covers, exposing the back bumper's retaining bolts.

Step 3: Using the 10mm socket/ratchet, remove the two 10mm bolts.

Step 4: Remove the Phillips retaining screws that line the underside of your back bumper.

Step 5: Disengage the retaining clips found on the underside of the back bumper (just beneath the trunk).

Step 6: You can now remove the rear bumper cover from the vehicle.

Step 7: Remove the two 10mm bolts beneath the tail light assembly.

Step 8: Remove the three retaining bolts located behind the removable trunk liner panel inside the vehicle's trunk.

Step 9: You can now remove the tail light assembly.

Step 10: Disconnect the wiring harness from the back of the tail light assembly.

Step 11: Connect the wiring harness to the back of the new tail light assembly.

Step 12: Secure the new tail light by tightening the three interior mounting bolts and two exterior (located beneath the assembly).

Step 13: Reattach the bumper cover by simply reversing the removal process.
These Part Change / Installation Instructions Apply to:

05 2005 Honda Accord Tail Lights Replacement Instructions

Average Rating: 5 of 5 stars
43 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.