Start Here

How do you Change, Replace, or Install Broken 2005-2007 Chrysler Town & Country Headlight Replacement

Fits years: 2005, 2006, 2007

All Chrysler Town & Country Headlights for sale Tools required:
  • 8mm socket/ratchet

Step 1: Lift the vehicle's hood.

Step 2: Loosen and remove the three 8mm bolts located on top of the headlight assembly.

Step 3: You can now slide the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses attached to the back of the headlight assembly. You will need to disengage the wiring bundle from the headlight. It is held on by a small clip.

NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply transfer the bulbs and sockets to the new assembly. This process takes just a few moments!

Step 5: Connect the wiring harness to the back of the new headlight assembly, and attach it via the retaining clip.

Step 6: Mount the new headlight assembly by tightening the three 8mm retaining bolts.
These Part Change / Installation Instructions Apply to:

05 2005, 06 2006, 07 2007 Chrysler Town & Country Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
32 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.