Start Here

How do you Change, Replace, or Install Broken 2005-2007 Chrysler Town & Country Headlight Replacement

Fits years: 2005, 2006, 2007

All Chrysler Town & Country Headlights for sale Tools required:

  • 8mm socket/ratchet

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the 8mm bolts (3) that secure the headlight assembly to the vehicle.

These bolts are located on TOP of the headlight assembly.

Step 3: You can now slide and remove the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses (2) from the back of the headlight assembly.

To disconnect the harnesses, you must slide the RED safety tab, and THEN disconnect the harness.

NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs and sockets, as most of our models do. This saves you an installation step! However, if your particular model does not, simply twist and remove the sockets from the old assembly and mount them to the new one.

Step 5: Connect the wiring harnesses (2) to the back of the new headlight assembly.

Step 6: Mount the headlight to the vehicle by tightening the 8mm bolts (3).
These Part Change / Installation Instructions Apply to:

05 2005, 06 2006, 07 2007 Chrysler Town & Country Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
32 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.