Start Here

How do you Change, Replace, or Install Broken 2005-2008 Toyota Corolla Tail Light Replacement

Fits years: 2005, 2006, 2007, 2008

All Toyota Corolla Tail Lights for sale Tools required:
  • 10mm socket/ratchet

Step 1: Open the vehicle's trunk.

Step 2: Loosen and remove the thumb-screw that holds the trunk liner in place, and pull the liner back enough to expose the tail light's mounting area.

Step 3: Loosen and remove the 10mm mounting bolts that hold the tail light assembly in place.

Step 4: Disconnect the wiring harness that is attached to the tail light assembly.

Step 5: You can now pull the assembly from the vehicle.

NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, in case your particular model doesn't include new bulbs, simply turn the sockets counter-clockwise to remove them from the old assembly and insert them into the new one.

Step 6: Connect the wiring harness to the new tail light assembly.

Step 7: Mount the new tail light assembly by using the guiding tabs to ensure proper placement and tightening the 10mm retaining bolts.

Step 8: Replace the trunk liner and secure it by tightening the thumb-screw.
These Part Change / Installation Instructions Apply to:

05 2005, 06 2006, 07 2007, 08 2008 Toyota Corolla Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
25 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.