Start Here

How do you Change, Replace, or Install Broken 2005-2009 Chevrolet Equinox Tail Light Replacement

Fits years: 2005, 2006, 2007, 2008, 2009

All Chevrolet Equinox Tail Lights for sale Tools required:
  • 10mm socket/ratchet with extension

  • Flathead screwdriver

Step 1: Open the vehicle's tailgate.

Step 2: Remove the small plugs that covers the tail light's mounting screws.

Step 3: Using the 10mm socket/ratchet, remove these mounting screws.

Step 4: You can now pull the tail light assembly from the vehicle.

This step may take a bit of work, as you will have to disengage it from the vehicle without breaking the tabs.

Step 5: Disconnect the wiring harnesses from the back of the tail light assembly.

NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, in case your particular model does not include new bulbs, simply remove the sockets/bulbs from your old assembly and insert them into the new one. This process only takes a few moments!

Step 6: Connect the wiring harness to the back of the new tail light assembly, and move it into place.

Be sure to use the alignment tabs to ensure that proper placement.

Step 7: Secure the tail light assembly by tightening the two 10mm retaining bolts.
These Part Change / Installation Instructions Apply to:

05 2005, 06 2006, 07 2007, 08 2008, 09 2009 Chevrolet Equinox Tail Lights Replacement Instructions

Average Rating: 5 of 5 stars
43 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.