Start Here

How do you Change, Replace, or Install Broken 2006-2010 Chevrolet HHR Fog Light Replacement

Fits years: 2006, 2007, 2008, 2009, 2010

All Chevrolet HHR Fog Lights for sale Tools required:
  • 5/32 Allen wrench

  • Flathead screwdriver

  • Needle-nose pliers

Step 1: Using the needle-nose pliers, remove the 2 retaining pins located in the wheel well.

This allows you to pull back the protective panel, giving you access to the mounting area.

Step 2: From the front of the vehicle, gently wedge your flathead screwdriver into the side of the fog light.

By creating a bit of separation and pushing backwards, the light will release into the interior of the lighting area, allowing you to remove it from the back.

NOTE: Now that the fog light is no longer in place, mark the adjusting screw so you can use it as a reference point for your new fog light. This ensures proper alignment (use a marker).

Step 3: Using the Allen wrench, you can remove the stud.

The Allen wrench bolt is accessible from underneath the casing. There will be a small opening, and you can see the Allen wrench bolt.

Step 4: Disconnect the wiring harness and remove the existing fog light from the vehicle.

Step 5: Connect the wiring harness to your replacement fog light.

Step 6: Be sure that you've aligned the light by moving the adjustment stud to the point that you marked before removing the old one.

Step 7: Insert the new fog light into its opening and mount into place.

It will snap into place.

Step 8: Reattach the inner fender by replacing the pins that hold it in place.
These Part Change / Installation Instructions Apply to:

06 2006, 07 2007, 08 2008, 09 2009, 10 2010 Chevrolet HHR Fog Lights Replacement Instructions

Average Rating: 5 of 5 stars
37 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.