Start Here

How do you Change, Replace, or Install Broken 2006-2012 Chevrolet Impala Tail Light Replacement

Fits years: 2006, 2007, 2008, 2009, 2010, 2011, 2012

All Chevrolet Impala Tail Lights for sale Tools required:
  • Flathead screwdriver

Step 1: Open the vehicle's trunk to expose the interior panel protecting the tail light assembly.

Step 2: Using a flathead screwdriver, remove the holding tab in the center of the interior panel.

Step 3: Unscrew the hand-bolt and remove the trunk's liner near the tail light.

Step 4: Unscrew the 2 remaining hand-bolts that are beneath the trunk liner.

Step 5: With a few light taps, you can now loosen and remove the tail light assembly from the vehicle.

Step 6: Gently unplug the electrical plug that connects the lighting assembly to the vehicle's electrical system.

Step 7: Plug your new tail light assembly into the electrical plug of the vehicle.

Be sure that you hear the electrical plug "snap" into place.

Step 8: Using the alignment pin and the 3 screws, you can now put the new tail light in place.

Step 9: Reconnect the 3 hand-bolt connectors.

The first two will be directly against the frame/lighting area. The final one will secure the trunk liner into place.

NOTE: The hand-bolt that secures the "cargo net" into place will be different from the other two! This one is the hand-bolt that is outside the trunk liner!

Step 10: Replace the clip that secures the interior panel.

It should simply "snap" into place.
These Part Change / Installation Instructions Apply to:

06 2006, 07 2007, 08 2008, 09 2009, 10 2010, 11 2011, 12 2012 Chevrolet Impala Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

[email protected]

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2017 GO-PARTS. All Rights Reserved.