Ford Bronco Drive Axle Shaft Seal Replacement

1.250 Shaft Diameter 2.000 Bore Diameter 2.004 Outside Diameter Seal 0.250 Width To Serial # K20000

Dana 44 3.256 in. O.D.~Dana 44; Standard Rotation; Front

559 Or 6408 Bearing; Not Coarse Spline Ford 8.8 in.; 559 Or 6408 Bearing; Not Coarse Spline

1.375 Shaft Diameter 2.000 Bore Diameter 2.004 Outside Diameter Seal 0.313 Width

2nd Design with 7.125 (in) Ring Gear 0.25 (in) Width with Spicer 30-AF Axle 2.0 (in) Outside Diameter

To Chassis #K20000 FAG Global Number 413 2324 100

Replacement Seal; Use w/Straight Axle Dana 44; Standard Rotation; Replacement Seal; Use w/Straight Axle

2nd Design with 7.125 (in) Ring Gear 0.328 (in) Width with Spicer 30-AF Axle 2.0 (in) Outside Diameter

1.688 Shaft Diameter 2.551 Bore Diameter 2.556 Outside Diameter Seal 0.470 Width

Dana/Spicer 28IFS Axle

Replacement Dana 44; IFS; Replacement

1.301 Shaft Diameter 2.621 Bore Diameter 2.625 Outside Diameter Seal 1.331 Width

1.438 Shaft Diameter 2.250 Bore Diameter 2.254 Outside Diameter Seal 0.313 Width

Replaces OE Part Number(s) E4TZ-3254-A, E4TZ-3254-B with Dana 44 Axle with Reverse Rotation

1.313 Shaft Diameter 2.281 Bore Diameter 2.286 Outside Diameter Seal 0.906 Width From Serial # K20001

FAG Global Number 413 2359 100

with 8.5 (in) Ring Gear with Spicer 44 Axle Independent Front Suspension

with 8.5 (in) Ring Gear with Spicer 44 Axle Independent Front Suspension

FAG Global Number 413 2738 100 1.688" Shaft

Dana 44 Reverse/44/50/35; AMC 35 Reverse Left Inner Dana 44; IFS; Front Left Inner

with 8.5 (in) Ring Gear with Spicer 44 Axle Independent Front Suspension

FAG Global Number 413 2367 100 2.625" O.D.

FAG Global Number 413 2495 100

Dana/Spicer 28IFS Axle

1.313 Shaft Diameter 2.620 Bore Diameter 2.625 Outside Diameter Seal 1.281 Width

Ford 9 in.

To Chassis #K20000 FAG Global Number 413 2394 100

9 in. 10 Bolt Outer Ford 9 in.; Rear Outer

From Chassis #K20001 FAG Global Number 413 2365 100 1.313" I.D.

with 8.5 (in) Ring Gear with Spicer 44-1F Axle

with 8.5 (in) Ring Gear with Spicer 44-1F Axle

with Ford 8.8 Axle

Dana 44; Straight Inner; Replacement; Reverse Rotation

2.502" OD, 1.5" ID, .437" Wide

with Dana 44 Axle

9 in. 10 Bolt; 28 Spline Ford 9 in.; 28 Spline

Dana 190/210mm

Redi Sleeve Dana 44; Standard Rotation~front axle inner seal redi-sleeve

For Use w/Dana 30/44/60; No Return Inner axle side seal installation tool