Ford Ranger Exhaust Muffler Replacement

If welded assembly, replace all required parts

Requires 35667 And Two 35564 Modifications and/or Additional Parts May Be Required for Installation

Old Design; DIRECT FIT MSL/MAXIMUM Muffler

Modifications and/or Additional Parts May Be Required for Installation

Requires 36233 If welded assembly, replace all required parts

If welded assembly, replace all required parts

DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

If welded assembly, replace all required parts

Replacement Requires Intermediate Pipe

Super Turbo System

If welded assembly, replace all required parts

Universal; Oval; 4.25 in. x 9.75 in.; 2 in. ID; 14 in. Shell Length; 18.5 in. Overall Length Intermediate Pipe Required

Universal; Oval; 4.25 in. x 9.75 in.; 2.5 in. ID; 20 in. Shell Length; 25.5 in. Overall Length

2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2 in. Offset Inlet/Center Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

Ultra Flo Welded System

Oval; 2.5 in. Inlet/Outlet; 4.5 in. H x 9.75 in. W x 20 in. Muffler L/25 in. Overall L; Offset/Center; Reversible; Stainless Steel Ultra Flo Welded System~Requires Bracket PN[36233]

2.5 in. Inlet/Outlet; 409 Stainless Internal Components; 304 Stainless Case Not Direct Fit-Some Adaptation Required

Universal; Oval; 2.5 in. Inlet/Outlet; 4.25 H in. x 9.75 in. W x 20 in. Muffler L/25 in. Overall L; Offset/Center; Reversible; Stainless Steel