Jeep Gladiator Bumper Replacement

This bracket is the OEM # 68353837AB.

OEM # is 68353836AB.

For the Jeep Wrangler Rubicon (2018-2021) with a Steel Bumper.
This fits models with Code MC6.
The OEM # is 68325051AD.

Fits 2020-2021 Jeep Gladiator Rubicon models with Code MC6 and a Steel Bumper.
The OEM # is 68325052AD.

This support fits the LAUNCH EDITION, OVERLAND, and RUBICON editions.
It is used with the Moulded Bumper.
OEM # 6MA00RXFAB

OEM #s: 68353837AB, 68353836AB
Partslink #s: CH1063110, CH1062110

OEM # is 68355489AA.

OEM # is 68341838AA.

Fits 2020-2021 Launch Edition, Rubicon, Overland, Sport, and Sport S models.
For vehicles with Moulded Bumper.
OEM # 6BU42RXFAC

Steel; w/Overrider

2 in. Steel Tube; Adjustable

20 in. Single Row LED

The OEM #s are: 68341838AA, 68355489AA.
The Partslink #s are: CH1167116, CH1166116.

Fits JL-2965 Bumper

Requires JT-5100; Fits JL-2965 Bumper

3/16 in. Steel Plate; Bolt On Design; For use Only w/PN[JT-2965]

Stamped Steel; Over Rider

Replacement Rear Inner Fender Liner Set; Comes With A Pair Of Molded Plastic Liners.

Fits All Models With Or Without Parking Sensors.

w/o D-Rings And Lights; High Clearance Design; Paintable Mesh Inserts; Textured Black

Fits All Wrangler JL/JLU And Gladiator Models. Factory Fog Light Part Numbers: 68347094AA and 68347095AA will NOT work with this bumper. Must use aftermarket 4in round fog lights with a bottom post mount. Does NOT include lights or accessories

Black; Stubby

Black

Mid-Width Design; Two Welded D-Ring Mounts; 3/16 in. Steel Plate; Textured Black

Does not work with Rubicon Steel Bumper Fog Lights

Steel; w/Overrider; High Clearance Ends

Stubby

3/16 in. Steel Plate; w/o Winch

Full Size; Matte Black

Fits All Wrangler JL/JLU And Gladiator Models. Factory Fog Light Part Numbers: 68347094AA and 68347095AA will NOT work with this bumper. Must use aftermarket 4in round fog lights with a bottom post mount. Does NOT include lights or accessories

w/No Guard; Bare Steel

Full Width

w/ Winch Tray and Tow Hooks

w/No Guard; 2 Stage Matte Black Powder Coated

The Pyro Pyro Stubby Front Bumper is compatible with OE 4-bolt mounting halogen fog lights only. OE 4-bolt mounting LED fog lights or OE 3-bolt mounting fog lights are not compatible

w/Pre-Runner Guard; Bare Steel

Textured Black With Sensors

Textured Black Minor Frame Modifications May Be Required For Some Competitor Winches

Textured Black

w/Pre-Runner Guard; 2 Stage Matte Black Powder Coated

Compatible with OE 4-bolt mounting halogen fog lights only. OE 4-bolt mounting LED fog lights or OE 3-bolt mounting fog lights are not compatible

Without Factory LED Lights

Textured Black Minor Frame Modifications May Be Required For Some Competitor Winches

Compatible with OE 4-bolt mounting halogen fog lights only. OE 4-bolt mounting LED fog lights or OE 3-bolt mounting fog lights are not compatible

Jeep, 20-25 Gladiator (JT)

Without Factory LED Lights

Satin Black Powder-Coated; 11 Gauge; Stamped Steel

Without Factory LED Lights

Direct-Fit

Textured Black Requires Grinding Of Vehicle Frame Bracket For Some Competitor Winches

Textured Black Minor Frame Modifications May Be Required For Some Competitor Winches

Without Factory LED Lights

Lightbar Not Included

Without Factory LED Lights

Stubby Front Bumper without grille guard tube (VR12, VR10, ZEON, XD9i, XD9, M8, VR8)

Textured Black Requires Grinding Of Vehicle Frame Bracket For Some Competitor Winches

Textured Black Requires Grinding Of Vehicle Frame Bracket For Some Competitor Winches

Mid Width; Steel; Satin Black

Spec Series

Stubby

Stubby; W/Over Rider

Texture Black

Mid Width; Sheetmetal Bar Guard; Steel; Satin Black

Mid Width; Pre-Runner Guard; Satin Black

w/Winch Tray; w/o Overrider

Black; w/Winch Plate

Texture Black

Textured Black

w/Sensors Bare

w/Sensors

9500 lb. Remote Winch; Texture Black

Full Width; Pre-Runner Guard; Satin Black

Full Width; Sheetmetal Bar Guard; Satin Black

No Allow Winch

Full Width; Steel; Satin Black

Mid Width; Stinger Guard; Steel; Satin Black

Fits Rubicon models only Not compatible w/factory steel bumper fog lights

Full Width; Sheetmetal Bar Guard; Steel; Satin Black

Use optional PN 3550150 when not fitting winch Not compatible w/factory steel bumper fog lights

w/No Guard; Bare; Plate Steel

w/No Guard; Plate Steel

Bare; w/No Guard

Backup Sensor Cutouts

Hammer Black Powder Coat Finish; 20 In. Light Bar Mount

w/Pre-Runner; Bare; Plate Steel

w/No Guard

w/Pre-Runner; Plate Steel

11 Gauge Steel Construction; Bare

Hammer Black Powder Coat Finish; 20 In. Light Bar Mount; w/D Ring Mount

Winch Mount

11 Gauge Steel Construction; 2 Stage Matte Black Powder Coat w/Epoxy Primer

w/No Guard Bare

w/No Guard

Bare

3/16 In. Steel Construction; Bare

Hammer Black Powder Coat Finish; 20 In. Light Bar Mount

3/16 In. Steel Construction; 2 Stage Matte Black Powder Coat w/Epoxy Primer

Textured Black

"Winch Ready; 20"" LED Bar Ready"