Jeep Wrangler Drive Axle Shaft Seal Replacement

Dana 35; Inner

Dana 44; Outer

Dana 35; Outer

For Dana 30 27-Spline Front Axle; 1.125 in. I.D.; 2.132 in. O.D.; Replaces O.E. PN[8121781]

FAG Global Number 413 2297 100

1.575 in. Shaft Diameter 2.126 in. Bore Diameter 2.131 in. Outside Diameter Seal 0.517 in. Width

Spicer 30-F - Disconnect

with 7.125 (in) Ring Gear with Disconnect with Spicer 30-AF Axle

Dana 44 (210mm) JL; 2.550 in. OD

For Dana 30 Front Axle; 1.54 in. I.D.; 2.14 in. O.D.; Replaces O.E. PN[83503504]

Dana 30 (186mm) JL; 2.420 in. OD

1.192 Shaft Diameter 2.122 Bore Diameter 2.128 Outside Diameter Seal 0.350 Width ; w/o Auto. Disconnect

Spicer 30-F - Disconnect

FAG Global Number 413 2671 100 1.625" I.D.

FAG Global Number 413 2646 100 2.131" O.D.

with 7.125 (in) Ring Gear with Spicer 30-AF Axle

Front Axle Disconnect Seal; 2.790 in. OD

Dana 44; Reverse;

Dana Model 44 Axle

Dana 30;

For Use w/[5707/1563] Bearing AMC Model 35; For Use w/[5707/1563] Bearing

Dana 44; Inner; w/Tru-Lock

Dana Model 35 Axle

Dana Model 35 Axle

Dana Model 44 Axle

with 8.5 (in) Ring Gear with Spicer 44 Axle

Dana 30/44; Oil Slinger

with Dana 30 Axle with Reverse Rotation

Dana Model 35 Axle

with Dana 30 Axle

Dana 30; Inner

Dana 30/Reverse; Replacement; 2.125 in. OD Dana 30; Reverse Rotation; Replacement; 2.125 in. OD

Replacement; Quick Disconnect 2.131 in. OD. Dana 30; Reverse Rotation; Replacement; Quick Disconnect 2.131 in. OD.

w/Disconnect Seals Fits Both Sides; w/Disconnect Axle Fits

Dana 44; Dana 44; Front Inner

Dana 30 Reverse Dana 30; Reverse Rotation

AMC 20; For Use with Set 10 Bearing Dana 44; For Use with Set 10 Bearing

Dana 44; With Aftermarket 35 Spline Axles

8.2 in./8.5 in. 10 Bolt; 8.875 in. 12 Bolt; AMC 20/35; For Use w/PN[SET9] Bearing AMC Model 35; For Use w/PN[SET9] Bearing

8.25 in. 10 Bolt; AMC 35; Dana 44/30 Reverse; 8.25 in. 10 Bolt; AMC 35; Dana 44/30 Reverse; Front Inner

3.112in Outside Diameter with Ultimate Dana 60 Front Axle

For Use w/Dana 35

Replaces OE Part Number(s) 04856336 with Dana 35 Rear Axle

For Use w/Dana 35 And Dana 44

AMC 35; 2.062 in. O.D. AMC 35; 2.062 in. O.D.

For Use w/Dana 35

2.29 in. Outside Diameter

For Use w/Dana 35 And Dana 44

For Use w/Dana 44 And AMC 20

2.12 in. Outside Diameter

Dana 44 (220MM) JL Rear;

Dana 44;

Dana 30 (186MM) JL Front;

Dana 44 (210MM) Front;

Dana 30; Inner For Disco Eliminator Kit; 2.00 in. OD

Dana 35 (200mm) and Dana 44 (220mm) Non Rubicon; Axle Seal

AMC 35 AMC Model 35~Dana 44

Dana 30/Reverse; Replacement; w/30 Spline Axles Dana 30/Reverse; Replacement; w/30 Spline Axles

AMC 35; For Use w/PN[SET9] Bearing AMC 35; For Use w/PN[SET9] Bearing

with Dana 35 AdvanTek Axle with Standard Differential

Dana 44/Reverse Dana 44; JK Rubicon

with 226mm Axle with Dana Model 44 Axle

SEAL

SEAL;Supersedes part # 05014852AC

For Use w/Dana 30/44/60; No Return Inner axle side seal installation tool