2017-2024 Chrysler Pacifica Cargo Cover: Fitment, Failures, and Buying Used
This guide covers common problems, critical compatibility warnings for Hybrid models, and how to inspect a used cargo cover for your gas-powered 2017-2024 Chrysler Pacifica.
- This cargo cover is ONLY for gasoline-powered Pacificas; it will NOT fit any Plug-in Hybrid (PHEV) model due to differences in the floor structure.
- The most common failure is the retraction spring. Always test the retraction multiple times before buying a used unit.
- Inspect the plastic end caps for cracks, as they are essential for mounting and are a common point of failure.
- Installation is a tool-free, 1-minute job, making a DIY replacement very simple.
Compatibility Warning: Gas vs. Plug-in Hybrid (PHEV) Models
Critical Warning: The standard retractable cargo cover for the 2017-2024 Chrysler Pacifica is designed exclusively for gasoline-powered models equipped with Stow 'n Go seating. It will NOT fit Plug-in Hybrid (PHEV) models. The battery pack in the PHEV is located under the floor where the second-row Stow 'n Go seats would normally be stored. This fundamental difference in the floor structure and seating configuration alters the cargo area dimensions and mounting points, making the standard gas model's cover incompatible. Aftermarket cargo liner manufacturers also explicitly state that their products for gas models will not fit the hybrid variants. Always verify the model of the vehicle before purchasing a cargo cover.
Common Symptoms of a Failing Cargo Cover
Failure of a Pacifica cargo cover is typically mechanical and easy to spot. There are no electronic components or trouble codes associated with this part. Look for the following signs:
- Failure to Retract: The most common issue is the cover losing its ability to retract smoothly or at all. This is usually caused by a weakened or broken internal spring mechanism.
- Sagging or Loose Cover: When extended, the cover material should be taut. If it sags, it indicates the material has stretched or the tensioning mechanism is failing.
- Broken or Cracked End Caps: The plastic end caps on the main housing are critical for mounting. These can become brittle over time and crack or break, especially during removal or installation, preventing the cover from seating securely in the vehicle.
- Rattling Noises: Loose internal components or broken end caps can cause the assembly to rattle and vibrate while driving, especially when the cover is retracted.
Buying a Used 2017-2024 Pacifica Cargo Cover: A Step-by-Step Inspection Guide
A used OEM cargo cover can be a great value, as new OEM units can be costly. However, a thorough inspection is essential to ensure you're getting a functional part.
Physical Inspection Checklist:
- Test the Retraction Mechanism: This is the most important test. Pull the cover out to its full extension and let it go. It should retract smoothly and completely into the housing. Repeat this test 4-5 times to ensure the spring is strong and consistent. A slow or partial retraction is a major red flag.
- Inspect the End Caps: Carefully examine the plastic end caps on both sides of the housing. Look for hairline cracks, chips, or any signs of stress. These are the mounting points, and if they are damaged, the cover will not fit securely.
- Examine the Cover Material: Unroll the cover completely and check for rips, tears, stains, or significant fading. Ensure the pull handle is securely attached and not cracked.
- Check for Housing Damage: Inspect the main aluminum or plastic housing for dents, deep scratches, or warping. Significant damage could impede the retraction mechanism.
Pro Tip: Many Pacificas, especially former rental fleet vehicles, have issues with the cargo area carpet pulling away from the trim panels. While not directly related to the cover itself, it's a common interior issue to be aware of when inspecting the cargo area.
Cost Comparison: New vs. Used
Prices for a Chrysler Pacifica cargo cover can vary significantly based on the source.
| Part Type | Estimated Price Range | Notes |
|---|---|---|
| New OEM | $225 - $330 | Purchased from a dealership or official Mopar e-store. Guarantees perfect fit and function. |
| New Aftermarket | $70 - $150 | Available from various online retailers. Quality and fit can be inconsistent compared to OEM. |
| Used OEM | $75 - $175 | A cost-effective option, but requires careful inspection using the checklist above. Prices vary by condition. |
Installation Guide
Installing the cargo cover is a simple, tool-free process.
- Locate the mounting recesses in the side trim panels of the cargo area, just behind the third-row seats.
- Compress one of the spring-loaded end caps on the cargo cover housing.
- Insert the fixed end cap into one of the mounting recesses.
- Align the compressed end with the opposite recess and allow it to expand into place.
- Ensure the housing is seated securely and does not wobble.
Pro Tip: The gas-powered Pacifica with Stow 'n Go has a dedicated storage area for the cargo cover in the in-floor storage bin when the third-row seats are up. 🎬 Watch: How to use the Stow 'n Go seating system This protects the cover from damage when not in use.
Known Issues, Recalls, and TSBs
As of early 2026, there are no specific recalls or Technical Service Bulletins (TSBs) from Chrysler or the NHTSA related to the retractable cargo cover for the 2017-2024 Pacifica. Any issues with the cover are related to general wear and tear rather than a manufacturing defect.
Frequently Asked Questions (FAQ)
Will this cargo cover fit my 2021 Chrysler Pacifica Hybrid?
No, it will not. The cargo cover for gasoline models is incompatible with all Plug-in Hybrid (PHEV) versions due to the location of the hybrid battery pack, which changes the floor and cargo area structure. You must source a cover specifically designed for the Pacifica Hybrid.
My cargo cover won't retract. Can it be fixed?
Sometimes, yes. The issue is almost always a broken or disconnected internal retraction spring. Repairing it involves disassembling the unit, which can be complex. It requires drilling out rivets, carefully handling the high-tension spring, and re-bending or re-attaching the spring end. For most people, replacing the entire unit with a good used one is a faster and safer option.
Where do I store the cargo cover when I'm not using it?
For gasoline models, Chrysler designed a specific storage spot for the cargo cover within the deep trunk well (the Stow 'n Go bin) behind the third row. 🎬 See a demonstration of the Stow 'n Go storage bins It can be stowed here when the third-row seats are upright.
How do I clean the cargo cover?
For general cleaning, use a vacuum with a brush attachment. For light stains, use a damp cloth with a mild soap and water solution. Avoid using harsh chemical cleaners, as they can discolor or damage the vinyl or fabric material.
Helpful Videos
Technical Specifications
OEM Part Numbers: 6FW02LC5AC 1GH14LC5AC 1GH14LC5AD 1GH14LC5AE 1GH14LC5AF 6FW02LC5AA 6FW02LC5AB
Retractable, spring-loaded design. Fits behind third-row seating.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Chrysler Pacifica:
- 🎬 Helpful Videos
- 🛍️ Shop This Part
- Compatibility Warning: Gas vs. Plug-in Hybrid (PHEV) Models
- Common Symptoms of a Failing Cargo Cover
- Buying a Used 2017-2024 Pacifica Cargo Cover: A Step-by-Step Inspection Guide
- Physical Inspection Checklist:
- Cost Comparison: New vs. Used
- Installation Guide
- Known Issues, Recalls, and TSBs
- Frequently Asked Questions (FAQ)
- 🎟️ Get 5% Off