2020-2023 Kia Telluride Overhead Console: Fixing Lights, Switches, and Sunroof Issues
A detailed guide to diagnosing, replacing, and buying a used overhead console map light assembly for your 2020-2023 Kia Telluride.
- The most common failures are faulty switches for the lights or sunroof, not the LED bulbs themselves.
- You must match the part number exactly when buying a used console, as it varies by sunroof, color, and UVO/SOS options.
- Replacement is a very easy DIY job, requiring only a trim tool and screwdriver, with no programming needed.
- Before buying a replacement, ensure the 'door override' button isn't simply turned off, as this is a very common user error.
Symptoms of a Failing Overhead Console
Because the overhead console integrates multiple functions, a failure can present in several ways. The LED lights themselves are generally reliable, so problems often point to the console's internal circuitry or switches.
- Interior Lights Don't Work or Flicker: If the map or dome lights don't turn on when you press the button, or if they flicker, the switch or a connection within the console is a likely culprit. Many owners first suspect a fuse, but if only specific lights controlled by the console are failing, the console itself is the next logical place to check.
- Lights Don't Turn On With Doors: A common complaint is that the interior lights fail to illuminate when a door is opened. This is often due to the "Dome Override" or "Door" button on the console being accidentally pressed, disabling the feature. While this is usually user error, a faulty switch can also cause this symptom.
- Sunroof Opens or Closes on its Own: A faulty sunroof switch within the console can send phantom signals, causing the sunroof to operate unexpectedly. This is a known issue and can be frustrating and a potential water leak hazard if it opens on its own during rain.
- Sunroof Won't Open or Close: If the sunroof motor has been ruled out, a dead switch in the overhead console will prevent the sunroof from operating.
- SOS or UVO System Malfunction Light: For equipped models, a failure in the console's circuitry can trigger a warning light for the telematics system, as the emergency buttons are housed there.
Pro Tip: Before assuming the console is bad, check the simplest thing first. Many new owners report their interior lights don't come on with the doors, only to discover the "door override" button on the overhead console was pressed. Make sure this button is in the correct position to enable door-activated lighting.
🎬 Watch this quick guide to setting your door-activated lights.Known Issues, TSBs, and Recalls
As of early 2026, there are no specific recalls issued by the National Highway Traffic Safety Administration (NHTSA) for the overhead console of the 2020-2023 Kia Telluride. However, several other recalls are active for this vehicle, including for a potential fire risk from the power seat motor and for a roll-away risk. It is always advisable to check for the latest recalls using your vehicle's VIN on the NHTSA website.
Forum discussions and mechanic reports point to the sunroof switch as a common point of failure within the console. Additionally, some owners of new Tellurides have reported intermittent interior light failures that were ultimately traced back to faulty junction boxes or wiring harnesses, not the console itself.
Buying a Used 2020-2023 Telluride Overhead Console
A used OEM console is often the most cost-effective solution for a failed unit. Since quality aftermarket consoles are not commonly available, a recycled original part is a great option. Here’s what to look for:
- Match the Part Number Exactly: This is the most critical step. Telluride overhead consoles come in many variations depending on trim level and options. Factors like the presence of a sunroof, a dual sunroof, UVO/SOS buttons, and the interior color (e.g., gray, black) will change the part number. The part number is printed on a sticker on the top of the console housing. Examples include 92800-S9000GYT (gray, no sunroof) and 92800-S9200WK (black, with dual sunroof). Do not buy a console unless you can verify the part number matches your original or is confirmed by a dealer to be compatible with your VIN.
- Inspect the Switches: Physically press every button on the console. They should move freely and have a crisp, tactile click. Mushy or stuck buttons are a red flag.
- Check for Physical Damage: Look for cracks in the plastic housing, broken mounting tabs, and deep scratches on the lenses. Ensure the electrical connector ports are clean and free of bent or corroded pins.
- Verify Features: Double-check that the console has the correct cutouts and buttons for your vehicle's options. If you have a sunroof, the console must have the sunroof switch. If you have UVO, it must have the SOS and roadside assistance buttons.
Warning: The part number 99960-S9000 is often associated with Telluride interior lighting but it is NOT an overhead console. This part number corresponds to a control module for the surround view camera system or an accessory ambient lighting kit. Do not purchase this part to fix your overhead lights.
Cost of Replacement
Prices can vary based on features and condition. All prices are estimates in USD.
| Part Type | Estimated Cost |
|---|---|
| New OEM (from dealer) | $325 - $560 |
| New Aftermarket | Not commonly available |
| Used OEM (Recycled) | $70 - $250 |
| Shop Labor | $75 - $150 |
Replacement Difficulty: 1/5
Replacing the overhead console is a straightforward DIY job that typically takes less than 30 minutes and requires no special tools.
- Using a plastic trim removal tool, gently pry down the front edge of the overhead console. Some models may have small covers that pop off to reveal screws.
- If screws are present, remove them. Otherwise, the console is held in by clips. Pull down firmly but carefully to release it from the headliner.
- With the console hanging down, you will see one or more electrical connectors. Press the release tab on each connector and unplug it.
- Plug the new console in, push it back into place until the clips engage, and replace any screws. Test all functions. 🎬 Watch a mechanic demonstrate how to remove the overhead console.
No programming or calibration is required for this part. It is a plug-and-play component.
Frequently Asked Questions (FAQ)
Why won't my interior lights turn on when I open the door?
This is almost always caused by the "Door Override" button on the overhead console. It usually has an icon of a car with a door open. Press this button to re-enable the lights to come on with the doors. If that doesn't work, the switch itself may be faulty.
My sunroof is acting weird. Could it be the overhead console?
Yes. The switch that controls the sunroof is a common failure point. If the sunroof moves on its own, gets stuck, or doesn't respond, and you've ruled out a fuse or mechanical issue with the sunroof track, the switch in the console is the likely problem. Sometimes a sunroof reset procedure can help, which involves pressing and holding the close button for 10-15 seconds until the roof cycles.
🎬 See how to perform a sunroof reset on your Telluride.Do I need to have the dealer program a new overhead console?
No. The overhead console on the 2020-2023 Telluride does not require any programming or special calibration. It is a plug-and-play part. The warning in the initial prompt about reprogramming refers to a different part, likely the surround view camera module (99960-S9000).
Can I just replace the broken switch instead of the whole console?
Technically, it might be possible for someone with advanced electronics and soldering skills. However, the individual switches are not sold separately by Kia, and it would be a difficult repair. For most people, replacing the entire console assembly is the only practical and reliable solution.
Helpful Videos
Technical Specifications
OEM Part Numbers: 92800-S9000GYT 92800-S9100GYD 92800-S9200WK 92800-S9600WK 92850-S9100
Varies by vehicle options (sunroof, dual sunroof, color, UVO/SOS buttons). Part number must be matched to the vehicle's specific configuration.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Kia Telluride: