Dodge Daytona Windshield Washer Pump Guide (1984-1993)
Everything a Dodge Daytona owner needs to know when the washer fluid stops spraying.
- A failed washer pump is a common age-related issue, but not a specific known problem area for the Daytona.
- Always check the fuse, fluid level, and for clogged nozzles before replacing the pump.
- A new aftermarket pump from a brand like Trico is the standard, reliable, and cost-effective solution.
- This is a simple DIY repair that most owners can complete in under an hour with basic tools.
Is Your Windshield Washer Pump Failing?
If you activate the washer switch and nothing happens, the pump is a likely suspect. On a car like the Dodge Daytona, which is now a classic, parts like the washer pump can fail simply due to age. The small electric motor can burn out, or the plastic housing can crack. Luckily, this is usually an easy and inexpensive fix.
First, Check the Simple Stuff
Before you buy a new pump, check these things first:
- Is the reservoir full? It sounds simple, but it's a common oversight.
- Is the fuse okay? Check your owner's manual for the location of the washer pump fuse and make sure it isn't blown.
- Are the nozzles clogged? Use a small pin or needle to clear any debris from the spray nozzles on the hood.
- Can you hear the pump? Have a friend stand near the front of the car while you activate the switch. If they hear a humming sound, the pump is getting power but may be clogged or have a broken impeller. If there is complete silence, the pump motor is likely dead or not receiving power.
Choosing the Right Aftermarket Pump for Your Daytona
For a 1984-1993 Dodge Daytona, finding a new original Mopar pump is nearly impossible. The standard repair is to use a quality aftermarket pump. These are designed to fit and function just like the original part.
Trico Windshield Washer Pumps: Trico is a well-known brand that has been making wiper system parts since 1917. Their aftermarket washer pumps are a reliable and cost-effective choice. They are designed for easy installation without needing to make any modifications. Reviews often state they are a great value and work just like the original equipment.
Pro Tip: Installation
Replacing the washer pump on a Daytona is a beginner-friendly job. The pump pushes into a rubber grommet at the bottom of the washer fluid reservoir. You will likely need to access it from the wheel well by removing part of the plastic fender liner. Have a bucket ready to catch the old washer fluid when you pull the old pump out.
Cost of Replacing a Dodge Daytona Washer Pump
| Part/Service | Estimated Cost |
|---|---|
| New Aftermarket Pump (Trico) | $24 - $30 |
| Shop Labor | $50 - $100 |
| DIY Total Cost | $24 - $30 |
| Shop Total Cost | $74 - $130 |
Frequently Asked Questions
Are there any recalls for the Dodge Daytona washer pump?
No. There are no recalls or common Technical Service Bulletins (TSBs) from the NHTSA for the windshield washer pump on the 1984-1993 Dodge Daytona. Recalls for washer pumps on newer Dodge vehicles are for different issues and do not apply to this generation.
Is an aftermarket pump as good as the original for this car?
Yes. For a vehicle of this age, a quality aftermarket pump from a brand like Trico is the industry standard for replacement. It is designed to meet or exceed the performance of the original pump, which is likely no longer in production.
Do I need any special tools to replace the pump?
No, you typically only need basic hand tools. A screwdriver or trim removal tool to remove fender liner clips, and possibly pliers for the hose clamp, are usually all that's required. The pump itself just pushes into place.
My pump hums but no fluid comes out. Is it broken?
It might be. If you've already checked for clogged nozzles and hoses, a humming pump that doesn't move fluid often has a broken internal impeller. It could also be clogged with old, gelled washer fluid. In either case, replacement is the best solution.
Technical Specifications
OEM Part Numbers: 4333414
The washer pump for the 1984-1993 Dodge Daytona is a 12V DC electric pump that press-fits into the washer fluid reservoir.
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Dodge Daytona: