1989 Dodge 2000 GTX Hazard Warning Flasher Replacement Guide
Fix common turn signal and hazard light problems on your 2000 GTX with this straightforward guide.
- A faulty hazard flasher is the most common cause of turn signal and hazard light issues on the 1989 Dodge 2000 GTX.
- Replacement is a simple, plug-and-play job located under the driver's side dash that takes about 15 minutes.
- Standard Ignition is a reliable aftermarket brand for this part, offering a cost-effective solution.
- If you have installed LED bulbs, ensure you purchase an 'electronic' flasher to prevent hyperflashing.
Is Your 2000 GTX Showing Signs of a Bad Hazard Flasher?
When a hazard warning flasher begins to fail, the symptoms are usually easy to spot. Because this part controls both the turn signals and the hazard lights, you will likely notice problems with one or both systems. The signs point to a bad flasher, not necessarily bad bulbs or more complex wiring issues.
Common Failure Symptoms:
- No Flashing: Your turn signals or hazard lights turn on but stay solid instead of blinking.
- No Lights at All: Neither the turn signals nor the hazard lights activate when you use the switch.
- Fast Flashing (Hyperflash): The signal lights blink much faster than normal. This can happen with a failing flasher or if you have installed LED bulbs without an electronic flasher.
- Intermittent Operation: The lights work correctly sometimes and fail at other times.
Choosing the Right Aftermarket Flasher
For a vehicle like the 1989 Dodge 2000 GTX, finding a new original equipment (OEM) flasher from a dealer is highly unlikely. Fortunately, aftermarket brands offer reliable and affordable replacements that meet or exceed the original specifications.
Standard Ignition is a well-known and trusted brand in the aftermarket industry. Their parts are manufactured in certified facilities and are designed for direct-fit installation. For a simple but crucial part like a flasher, a Standard Ignition product provides a dependable and cost-effective repair. The two products available in the $10.43 - $30.57 price range likely represent a standard thermal flasher and an electronic flasher. If you use standard incandescent bulbs, either will work. If you have upgraded or plan to upgrade to LED signal bulbs, you must use an electronic flasher to prevent hyperflashing.
Cost of Replacing Your Hazard Warning Flasher
Replacing the hazard flasher is one of the more affordable repairs you can perform. The part itself is inexpensive, and if you do it yourself, the only cost is the part. A professional shop will not charge much for the simple labor involved.
| Part Type | Estimated Cost |
|---|---|
| New Aftermarket (e.g., Standard Ignition) | $10 - $31 |
| Shop Labor | $25 - $75 |
| Total Professional Repair | $35 - $106 |
| New OEM | Likely Unavailable |
Pro Tip: Finding the Flasher
The hazard flasher on the 1989 Dodge 2000 GTX (and its sibling, the Mitsubishi Galant) is located under the driver's side dashboard, near the fuse box area. The easiest way to find it is to turn on your hazard lights (if they work intermittently) and listen for the clicking sound. You can also feel the relays in that area; the one that is clicking or vibrating is the flasher.
Frequently Asked Questions (FAQ)
Where is the hazard flasher located on a 1989 Dodge 2000 GTX?
The hazard flasher unit is located under the driver's side of the dashboard, typically attached to or near the junction block (fuse panel). You may need to remove a lower dash panel to see it clearly. Listen for the clicking sound to pinpoint its exact location.
Can I replace the hazard flasher myself?
Yes, this is a very easy DIY job. It is a plug-and-play component. No special tools are needed; you simply locate the old flasher, unplug it, and plug the new one in. The entire process should take less than 15 minutes.
Why are my turn signals blinking so fast?
This is called "hyperflash." It usually means one of two things: a bulb has burned out, or the flasher relay is failing. If all your bulbs are good, the fast blinking is a classic symptom of a bad flasher. It can also occur if you've installed LED bulbs with a flasher that isn't designed for them.
My hazard lights work, but my turn signals don't. Is it still the flasher?
Yes, it's possible. Even though the flasher unit controls both systems, it can fail in a way that affects only one of the functions. Given the low cost of the part, it is the first and most logical component to replace when diagnosing this issue.
Are there any recalls for the hazard flasher on the 1989 Dodge 2000 GTX?
No, there are no recalls or technical service bulletins (TSBs) issued by the NHTSA for the hazard warning flasher on the 1989 Dodge 2000 GTX.
Technical Specifications
Typically a 2 or 3-terminal plug-in relay. Check the pin configuration of your existing flasher before ordering.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Dodge 2000 GTX: