A Guide to the Brake Light Switch for the 1991-1993 Isuzu Stylus
Solve brake light issues and select the correct new aftermarket switch for your Isuzu Stylus.
- A faulty brake light switch is a critical safety issue and should be replaced immediately.
- Always check the bulbs and fuses before replacing the switch itself.
- Replacement is simple and can be done by a DIYer with basic tools in under an hour.
- No recalls or specific TSBs have been issued for the 1991-1993 Isuzu Stylus brake light switch.
Is Your Brake Light Switch Failing?
A brake light switch is a small part, but a failure can cause major safety problems. Before you assume the switch is bad, always check the simple things first: make sure the brake light bulbs are good and check the brake light fuse in your fuse panel. If those are fine, the switch itself is the next likely culprit. Watch for these common symptoms of a failing switch.
Common Failure Symptoms
- Brake Lights Don't Work: The most obvious sign is when your brake lights do not turn on at all when you press the pedal. This is a critical safety failure.
- Brake Lights Stay On: The switch can fail in the 'on' position, causing the brake lights to stay illuminated even when you are not braking. This can drain your battery and confuse other drivers.
- Cruise Control Issues: If your Stylus has cruise control, a faulty switch might prevent it from engaging or cause it to disengage unexpectedly.
Choosing the Right Aftermarket Brake Light Switch
For a vehicle like the 1991-1993 Isuzu Stylus, aftermarket parts are the most common and cost-effective solution. Original Equipment (OEM) parts may be difficult to find. Aftermarket brands offer a range of quality and price points that meet or exceed original specifications.
Brand Quality Tiers
- Premium Aftermarket (Standard Ignition, Beck Arnley): Brands like Standard Motor Products (SMP) and Beck Arnley are well-regarded in the industry. Beck Arnley specializes in parts for import vehicles, focusing on matching OEM form and function. Standard is known for producing durable components that are trusted by professional mechanics.
- Quality Aftermarket (Dorman, Facet, Holstein): Dorman is a popular brand that provides a direct replacement fit and reliable function at a good value. Facet and Holstein also offer dependable options that serve as cost-effective replacements.
- Value Options (Replacement): Generic or private-label brands like "Replacement" offer a functional part at the lowest price point, making them a good choice for budget-conscious repairs.
Pro Tip: Simple Installation
Replacing the brake light switch on a Stylus is a straightforward job for a DIY mechanic. It is typically a threaded switch held onto the pedal bracket with one or two nuts. The process involves disconnecting the electrical connector, unscrewing the old switch, screwing in the new one, and reconnecting it. You may need to adjust the position of the switch by turning it so the brake lights activate correctly when the pedal is pressed.
Cost of a New Brake Light Switch (1991-1993 Isuzu Stylus)
| Part Type | Estimated Cost |
|---|---|
| New Aftermarket | $6.28 - $29.38 |
| Shop Labor | $50 - $75 |
Frequently Asked Questions
Can I replace the brake light switch myself?
Yes, this is a great DIY task for beginners. It usually requires basic hand tools and involves working in the driver's side footwell. The switch is located above the brake pedal.
Are there any recalls for the Isuzu Stylus brake light switch?
No, searches of the National Highway Traffic Safety Administration (NHTSA) database show no open recalls for the brake light switch on the 1991-1993 Isuzu Stylus.
Do I need to adjust the new switch?
Yes, adjustment is often necessary. The switch is threaded, and you must position it so the plunger is fully depressed when the brake pedal is released, but activates as soon as you begin to press the pedal. An incorrectly adjusted switch can cause the lights to stay on or have a delayed reaction.
My brake lights still don't work after replacing the switch. What now?
If a new switch doesn't solve the problem, re-check the fuse and all brake light bulbs. You should also inspect the wiring and the connector for any signs of corrosion or damage. A multimeter can be used to test for power at the switch connector.
Technical Specifications
OEM Part Numbers: 8943629300 8941187541 88924663 2532075A00 19021018
The switch is a push-type design with a 2-prong male blade terminal and a female connector.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Isuzu Stylus: