1995-1996 Chevrolet Caprice Hazard Warning and Turn Signal Flasher Guide
Having trouble with your turn signals or hazard lights? Your flasher unit might be the culprit.
- The hazard and turn signal flasher is a common point of failure for signal light issues.
- For the 1995-1996 Caprice, this is a very easy and inexpensive DIY replacement located under the dash.
- Aftermarket brands like Standard Ignition offer a quality, reliable alternative to OEM parts.
- Symptoms include lights not working, staying on solid, or flashing too quickly.
Is Your Caprice's Flasher Failing?
A faulty flasher can create confusing and dangerous situations on the road. If you notice any of these signs, it's time to inspect the flasher unit.
- Signals Don't Work at All: The most common issue is when both turn signals and hazard lights completely stop flashing.
- Lights Stay On (No Flash): If the lights turn on but don't blink, the flasher's internal switch may be stuck.
- Signals Flash Too Fast (Hyperflash): While often a sign of a burnt-out bulb, a failing flasher can also cause the lights to blink rapidly.
- Intermittent Operation: The signals might work sometimes and fail at other times, which can be a sign of a failing relay.
Choosing the Right Aftermarket Flasher
For a vehicle like the 1995-1996 Caprice, aftermarket parts are widely available and offer a reliable, cost-effective solution. The original AC Delco parts may be harder to find as new old stock (NOS), and an aftermarket part from a reputable brand will perform just as well.
Brand Spotlight: Standard Ignition
Standard Motor Products (SMP), sold under the Standard Ignition brand, is a well-regarded aftermarket manufacturer. Their parts are produced in TS16949 and ISO9001 certified facilities, which ensures a high level of quality control. They offer direct-fit replacement flashers for the Caprice, often with options for either a metal or plastic housing. Owner reviews for Standard flashers are generally positive, making them a dependable choice for this repair.
Replacement Cost
Replacing the hazard flasher is one of the more affordable repairs you can perform on your Caprice. The part itself is inexpensive, and if you choose to have a shop do the work, labor costs should be minimal due to the simplicity of the job.
| Part Type | Estimated Cost |
|---|---|
| New Aftermarket (e.g., Standard Ignition) | $10.43 - $30.57 |
| New OEM (AC Delco) | $16.00 - $26.00 |
| Shop Labor | $25 - $50 |
Installation Tip
The hazard and turn signal flashers are typically located under the driver's side dashboard, often near the steering column or attached to the fuse panel. On some models, there are two identical-looking flashers side-by-side; one for the turn signals and one for the hazards. The replacement process is simple: locate the old flasher, unplug it, and plug the new one in. No special tools are required.
Frequently Asked Questions
Is the turn signal flasher the same as the hazard flasher on a '95-'96 Caprice?
Yes, in many cases, a single combination flasher unit controls both the turn signals and the hazard lights. However, some configurations may use two separate, identical flashers located next to each other—one for turns and one for hazards. If one system works and the other doesn't, you can try swapping them to diagnose the problem.
Where is the hazard flasher located?
It is located under the driver's side of the dashboard. You may need to remove the lower dash panel to access it. It's a small, round or square relay plugged into the fuse block or a wiring harness.
Can I replace the hazard flasher myself?
Absolutely. This is a very simple DIY job that usually takes less than 15 minutes and requires no special tools. It's a plug-and-play component.
Why are my turn signals blinking fast?
This is called "hyperflashing." The most common cause is a burnt-out turn signal bulb elsewhere on the vehicle. The change in electrical resistance makes the flasher blink faster. If all your bulbs are good, the flasher itself may be failing.
Known Issues & Recalls
There are no specific recalls or Technical Service Bulletins (TSBs) from the NHTSA related to the hazard warning flasher for the 1995-1996 Chevrolet Caprice. Searches show several recalls for this vehicle, but they pertain to suspension components, wheels, and lighting assemblies, not the flasher relay itself.
Technical Specifications
OEM Part Numbers: 19209674
Typically a 2-terminal, 12-volt electro-mechanical flasher.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Chevrolet Caprice: