Chrysler Sebring Fuel Injector Guide: Choosing the Right Part for 1995-2000 Models
Engine misfires or poor fuel economy in your Sebring could point to a failing fuel injector.
- You MUST verify your engine size (2.0L I4, 2.4L I4, or 2.5L V6) before ordering, as injectors are not interchangeable.
- Replacing all injectors as a set is highly recommended for balanced performance and to prevent future repairs.
- Premium aftermarket brands like Standard Ignition offer good reliability, while budget remanufactured injectors carry a higher risk of defects.
- A strong fuel smell is a critical symptom of a leak; do not operate the vehicle until it is inspected.
Engine Type is Critical for Your 1995-2000 Sebring
Before buying a fuel injector, you must know which engine is in your car. The 1995-2000 Chrysler Sebring used different engines, and the fuel injectors are not interchangeable. Ordering the wrong part is a common and costly mistake.
- 2.0L 4-Cylinder: Found in some base model coupes.
- 2.4L 4-Cylinder: Another 4-cylinder option, primarily in sedans and convertibles.
- 2.5L V6 (Mitsubishi Engine): Common in higher-trim JXi and LXi models, this engine requires a different injector than the 4-cylinder versions.
Symptoms of a Failing Fuel Injector
A bad fuel injector disrupts the engine's air-fuel mixture, leading to noticeable problems. You might experience one or more of the following issues:
🎬 Watch: 11 telltale signs your fuel injectors are going bad.- Rough Idle: The engine may shake or vibrate when the car is stopped.
- Engine Misfires: You might feel a stutter or hesitation during acceleration. This can trigger a flashing Check Engine Light and codes like P0300, P0301, etc.
- Poor Fuel Economy: If an injector is stuck open, it wastes gas. If it's clogged, the engine runs inefficiently.
- Loss of Power: The car may feel sluggish and slow to respond.
- Fuel Smell: A strong gasoline odor around the car can indicate an injector is leaking fuel, which is a serious fire hazard.
Choosing the Right Aftermarket Fuel Injector
When replacing a fuel injector, you have options. For a vehicle of this age, new aftermarket parts offer a good balance of quality and value. It is highly recommended to replace all injectors at the same time to ensure each cylinder gets the same amount of fuel for a smooth-running engine.
Premium Aftermarket Brands (e.g., Standard Ignition)
Brands like Standard Motor Products (SMP) are known for producing quality replacement parts that meet or exceed original specifications. They are one of the better aftermarket suppliers, and their injectors undergo extensive testing to ensure proper flow rates and spray patterns. While occasional defects can occur with any part, these brands generally offer good reliability and are a solid choice for a dependable repair.
Budget Remanufactured Brands (e.g., GBR Fuel Injection)
GBR offers remanufactured original equipment (OEM) injectors. This can be a very budget-friendly option. However, the quality can be inconsistent. Some owners have used them without issues, but others have reported premature failures, including injectors being stuck open right out of the box. A stuck-open injector can dump raw fuel into the cylinder, leading to engine damage or a fire hazard. This is a higher-risk option best suited for those on a tight budget who are aware of the potential for defects.
A Note on Replacing Injectors
If one injector has failed due to age or mileage, the others are likely not far behind. Replacing all injectors as a set ensures balanced fuel delivery and can prevent you from having to do the same repair again in the near future.
Cost to Replace a Chrysler Sebring Fuel Injector
| Part Type | Estimated Cost (Per Injector) |
|---|---|
| New OEM | $150 - $250+ |
| New Aftermarket (Premium) | $80 - $220 |
| New Aftermarket (Value) | $56 - $90 |
| Remanufactured | $30 - $75 |
| Shop Labor | $210 - $310 (for the set) |
Costs are estimates and can vary based on location, supplier, and the specific engine in your vehicle. Labor costs are for replacing the full set.
Frequently Asked Questions
Can I replace just one fuel injector?
You can, but it's not always the best idea. If one injector failed from being old and worn out, the others are likely in similar condition. Replacing them all at once ensures every cylinder gets the same amount of fuel, which helps the engine run smoothly and efficiently. It also saves you from paying for the same labor cost again if another injector fails soon.
Is replacing a fuel injector a DIY job?
For an experienced DIY mechanic, yes. However, it requires relieving the fuel system pressure, which can be dangerous. On the V6 engine, the upper intake manifold must be removed to access the fuel rail and injectors. If you are not comfortable with these steps, it is best to have a professional mechanic do the job.
🎬 Watch this walkthrough on how to replace fuel injectors yourself.What's the difference between new and remanufactured injectors?
New injectors are brand new parts. Remanufactured injectors are used OEM injector bodies that have been cleaned, tested, and fitted with new seals and filters. Premium remanufactured injectors can be reliable, but budget options have a higher reported failure rate.
Are there any recalls for the 1995-2000 Sebring fuel injector?
Based on searches of the NHTSA database, there are no specific fuel injector recalls for this generation of the Chrysler Sebring. Most issues are related to normal wear and tear over time.
Helpful Videos
Technical Specifications
OEM Part Numbers: INP-060 (For 2.5L V6) MR507252 (For 2.5L V6) MD162524 (For 2.0L I4)
All engines in the 1995-2000 Chrysler Sebring use a Port Fuel Injection (PFI) system. The injectors are high impedance. The 2.5L V6 uses Nikki-style injectors.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Chrysler Sebring:
- 🎬 Helpful Videos
- 🛍️ Shop This Part
- Engine Type is Critical for Your 1995-2000 Sebring
- Symptoms of a Failing Fuel Injector
- Choosing the Right Aftermarket Fuel Injector
- Premium Aftermarket Brands (e.g., Standard Ignition)
- Budget Remanufactured Brands (e.g., GBR Fuel Injection)
- A Note on Replacing Injectors
- Cost to Replace a Chrysler Sebring Fuel Injector
- Frequently Asked Questions
- 🎟️ Get 5% Off