1995-2001 Chrysler Sebring Intake Air Temperature Sensor Guide
Address poor engine performance and bad gas mileage by understanding and replacing your Sebring's Intake Air Temperature Sensor.
- A failing IAT sensor on a 1995-2001 Sebring commonly causes a Check Engine Light, poor gas mileage, and rough running.
- Replacement is a simple, beginner-friendly DIY task that takes less than 15 minutes.
- The sensor is located on the main air intake tube, making it easy to access.
- Quality aftermarket brands like Standard Ignition offer a reliable and affordable alternative to more expensive OEM parts.
Is a Failing IAT Sensor Causing Your Sebring Problems?
A faulty Intake Air Temperature (IAT) sensor can be the source of several frustrating engine issues on your 1995-2001 Chrysler Sebring. Because the engine's computer relies on this sensor for accurate air temperature readings, a bad sensor can feed it incorrect information, leading to a poor air-fuel mixture. This can cause noticeable problems like a rough idle, hesitation when you accelerate, and a significant drop in fuel efficiency.
Common Symptoms of a Bad IAT Sensor
🎬 Watch this video to learn more about IAT sensor symptoms.- Check Engine Light (often with codes P0110, P0112, P0113)
- Poor fuel economy
- Rough or jumpy idle
- Hesitation or poor acceleration
- Hard starting, especially when the engine is cold
Choosing the Right Aftermarket IAT Sensor
For a vehicle like the 1995-2001 Sebring, aftermarket IAT sensors offer a cost-effective solution compared to OEM parts. The key is choosing a brand with a reputation for reliability. The technology for this type of sensor is well-established, and quality aftermarket parts can perform just as well as the original.
- Standard Ignition (Standard Motor Products): A widely recognized and respected aftermarket brand, Standard often serves as a direct OE replacement. Reviews for their IAT sensors are generally positive, citing good fitment and function. They are a solid choice for a reliable, long-lasting repair.
- True-Tech: This brand often falls into the value or standard-grade category. While there is less specific information available for their sensors, they are typically associated with NAPA Auto Parts and are presented as a reliable repair option. For a simple component like an IAT sensor, this brand can be a budget-friendly choice that gets the job done.
Pro Tip: On the 1995-2001 Chrysler Sebring, the IAT sensor is a separate component. It is typically located in the plastic air intake tube that runs between the air filter box and the engine's throttle body. It's a simple twist-in or screw-in sensor, making replacement a very straightforward DIY job.
Cost of Replacing an IAT Sensor on a 1995-2001 Chrysler Sebring
| Part/Service | Estimated Cost |
|---|---|
| New Aftermarket Part | $28.35 - $56.41 |
| Shop Labor | $30 - $70 |
| Total DIY Cost | $28.35 - $56.41 |
| Total Professional Replacement | $58 - $127 |
Frequently Asked Questions
Where is the IAT sensor located on my Sebring? 🎬 See exactly where your Sebring's emissions sensors are located.
For the 1995-2001 models, look for the sensor plugged into the black plastic air intake duct, between the air filter housing and the throttle body. It is a small, two-wire sensor that can be removed by disconnecting the electrical plug and turning the sensor to unlock it.
Can I just clean the IAT sensor?
While you can attempt to clean the sensor tip with an appropriate electrical parts cleaner, it often doesn't solve the problem. The sensor fails internally when the thermistor (the part that reads temperature) degrades. Given the low cost of a new aftermarket sensor, replacement is the most reliable repair.
What happens if I don't replace a bad IAT sensor?
Driving with a faulty IAT sensor is not recommended. You will experience poor engine performance, increased fuel consumption, and higher emissions. Over time, running a consistently rich or lean fuel mixture can potentially lead to damage to other components like the catalytic converter.
Are there any recalls for this part on my Sebring?
No, there are no specific recalls or technical service bulletins (TSBs) from Chrysler or the NHTSA related to the Intake Air Temperature sensor 🎬 Check out other common problems to watch for on your Sebring. for the 1995-2001 Chrysler Sebring. Known issues for this vehicle generation typically involve engine oil sludge (on the 2.7L V6), electrical problems, and suspension components.
Helpful Videos
Technical Specifications
OEM Part Numbers: 5S1061 AX26
Typically a 2-pin, screw-in or twist-in style thermistor sensor.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Chrysler Sebring: