2000-2001 Plymouth Neon Hazard Warning and Turn Signal Flasher Guide
If your turn signals or hazard lights are acting up, the small flasher module in your steering column is the most likely reason.
- The hazard flasher module controls both turn signals and emergency lights; its failure is a common problem.
- Symptoms include no lights, intermittent function, or lights that stay on without flashing.
- Replacement is very easy, requiring only a screwdriver and about 20 minutes.
- Standard Ignition is a reliable aftermarket brand for this part, offering OE-level performance.
Is Your Neon's Flasher Failing? Common Symptoms
A failing hazard flasher module is a common issue on the 2000-2001 Plymouth Neon. The symptoms usually point directly to this part, making it easier to diagnose. Before assuming the flasher is bad, it's always a good idea to check for simple fixes first, like blown fuses in both the interior fuse panel and the one in the engine bay.
- Turn Signals and Hazard Lights Don't Work: The most common symptom is when neither the turn signals nor the hazard lights will turn on.
- Intermittent Operation: The lights may work sometimes and not others. This can be an early sign of the module beginning to fail.
- Lights Stay On Solid: Instead of flashing, the turn signal or hazard light indicators may stay lit without blinking.
- No Clicking Sound: You won't hear the typical clicking noise from the dashboard when you try to use the signals or hazards.
Choosing the Right Aftermarket Flasher
For the 2000-2001 Plymouth Neon, you won't find a huge variety of aftermarket brands for the hazard flasher. The most widely available and trusted option is Standard Ignition (also known as Standard Motor Products or SMP).
OEM vs. Aftermarket Quality: The original Mopar flasher was effective, but like any electronic part, it has a limited lifespan. Aftermarket parts from reputable brands like Standard Ignition are designed to meet or exceed original equipment (OE) specifications. They are built as direct-fit replacements and are a reliable and cost-effective choice for a vehicle of this age. There is no significant quality drop-off when choosing a premium aftermarket brand for this specific part.
Typical Replacement Costs
Replacing the hazard flasher is not an expensive job. The part itself is reasonably priced, and labor is minimal because it's easy to access.
| Part Type | Estimated Cost |
|---|---|
| New Aftermarket (Standard Ignition) | $83.77 - $109.34 |
| Shop Labor | $50 - $95 |
| Total Estimated Cost | $134 - $205 |
Installation Overview
Replacing the hazard flasher on a 2000-2001 Neon is a straightforward job that most DIYers can handle in under 20 minutes.
- Locate the plastic shrouds (covers) around the steering column.
- Remove the two Phillips head screws on the bottom shroud.
- Separate the top and bottom shrouds to expose the steering column components.
- The hazard flasher module is a small black or white box plugged into the back of the multifunction (turn signal) switch. You can often find it by turning the key and listening for the clicking sound if it's working intermittently.
- Carefully wiggle the old flasher module out of its socket.
- Plug the new module in, making sure the terminals are aligned correctly.
- Test the turn signals and hazard lights before reassembling the steering column covers.
Frequently Asked Questions
Where is the hazard flasher located on a 2000-2001 Plymouth Neon?
The hazard flasher is a small, plug-in module located directly on the back of the multifunction switch (the turn signal stalk assembly) inside the steering column. You have to remove the plastic covers around the steering column to see and access it.
Why did my turn signals stop working but my hazard lights still work (or vice-versa)?
While the flasher module controls both, they run on slightly different circuits and can fail independently. Sometimes a blown fuse for one system can cause this, so check the fuse box under the hood for the hazard lights and the one inside the car for the turn signals. However, if the fuses are good, it often points to an internal failure in the flasher module or the multifunction switch itself.
Is there a recall for the hazard flasher on the 2000-2001 Plymouth Neon?
No, there have been no specific recalls issued by the NHTSA for the hazard warning flasher or multifunction switch on the 2000-2001 Plymouth Neon. Recalls for this vehicle focused on other issues like brake booster hoses and throttle body problems.
Can I replace the hazard flasher myself?
Yes, this is a very DIY-friendly repair. It only requires a Phillips head screwdriver and about 15-20 minutes. The part is a simple plug-and-play module, making it one of the easiest electrical repairs you can do on your Neon.
Technical Specifications
OEM Part Numbers: 5013812AA
Plug-in module with 9 or 10 terminals, located on the multifunction switch within the steering column.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Plymouth Neon: