2000-2005 Dodge Neon Hazard and Turn Signal Flasher Guide
If your Neon's turn signals or hazard lights are acting up, this simple relay is the most likely cause.
- The hazard flasher and turn signal flasher are the same part in the 2000-2005 Neon.
- Symptoms include lights that don't flash, don't work at all, or work intermittently.
- This is a very easy DIY replacement that takes about 15 minutes with just a screwdriver.
- If hazards work but turn signals don't, suspect the multi-function switch on the steering column, not the flasher relay.
Is Your Neon's Flasher Failing?
A bad hazard flasher relay is a common issue on the second-generation Dodge Neon. The symptoms are usually very noticeable and can happen suddenly. Because this relay controls both the turn signals and the hazard lights, you will likely see problems with both systems.
Common Failure Symptoms:
- No Flashing at All: Your turn signals or hazard lights turn on but stay solid instead of flashing.
- Complete Failure: Neither the turn signals nor the hazard lights work when you try to use them.
- Intermittent Problems: The signals work sometimes and not others, which can be confusing. You might have to jiggle the turn signal stalk to get them to work.
- Incorrect Speed: The lights flash much faster or slower than normal.
It's important to know that if your hazard lights work but your turn signals don't, the problem might be the multi-function switch (the stalk on the steering column) instead of the flasher relay.
Choosing the Right Aftermarket Flasher
For a vehicle like the 2000-2005 Neon, using a new aftermarket flasher is a smart and affordable choice. The original Mopar part (OEM Part #4671715AB) is often discontinued and can be expensive if you find one. Aftermarket brands offer a direct replacement that works well.
Brand Tiers for Your Neon:
- Standard Ignition (SMP): This is a well-regarded aftermarket manufacturer. Their parts are made to fit and work like the original and undergo quality testing. For most Neon owners, this is a reliable and solid choice.
- Crown Automotive: Crown specializes in parts for Chrysler, Dodge, and Jeep vehicles. They aim for OEM quality, but owner reviews can be mixed; some find the parts to be a great value, while others have had issues. It's generally considered a decent budget-friendly option.
Pro Tip: Since this is a simple and inexpensive part, choosing a trusted brand like Standard Ignition can give you more peace of mind than saving a few dollars on a lesser-known brand.
Easy DIY Installation
Replacing the hazard flasher is one of the easiest repairs you can do on your Neon. It requires only a basic tool and about 15 minutes.
- Locate the Flasher: The flasher relay is located inside the steering column cover, just behind the steering wheel.
- Remove the Cover: Use a Phillips head screwdriver to remove the two screws on the bottom of the steering column's plastic cover.
- Swap the Relay: The cover will pop open. You will see the small, box-shaped flasher relay plugged in. Simply pull the old one straight out.
- Install the New Flasher: Line up the pins on the new flasher and push it firmly into the socket. You might hear it click.
- Test and Reassemble: Turn the key and test your turn signals and hazard lights. Once you confirm they work, snap the steering column cover back together and replace the screws.
| Part Type | Estimated Cost |
|---|---|
| New Aftermarket (Crown, Standard) | $83.77 - $109.34 |
| New OEM (Mopar) | $100 - $160+ (if available) |
| Used OEM | $20 - $50 |
| Shop Labor | $50 - $100 |
Frequently Asked Questions
Where is the hazard flasher on a 2000-2005 Dodge Neon?
It is plugged into a socket inside the plastic cover of your steering column, right below the steering wheel.
Why did my turn signals and hazard lights stop working at the same time?
Because a single flasher relay controls both the turn signals and the hazard lights on your Neon. When this relay fails, both systems are affected.
Can I replace the hazard flasher myself?
Yes, this is a very easy DIY job. All you need is a Phillips screwdriver and about 15 minutes. The part is easy to access and just plugs in.
My hazard lights work but the turn signals don't. Is it the flasher?
Probably not. If one system works and the other doesn't, the problem is more likely the multi-function switch (the turn signal lever itself) or a wiring issue, since they operate on separate circuits that feed into the flasher.
Technical Specifications
OEM Part Numbers: 4671715AB
5-pin electronic flasher relay
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Dodge Neon: