Chrysler Sebring Turn Signal & Multifunction Switch Guide (2001-2010)
Having issues with your turn signals, wipers, or high beams? Your multifunction switch might be the culprit.
- A bad switch is a safety hazard; replace it promptly if signals or lights fail.
- This is a DIY-friendly repair that usually doesn't require removing the steering wheel.
- Symptoms can include failure of turn signals, headlights, and wipers.
- Aftermarket brands like Standard Ignition offer a quality alternative to the more expensive OEM part.
Is Your Sebring's Turn Signal Switch Failing?
A failing multifunction switch in a 2001-2010 Chrysler Sebring can be frustrating and a serious safety issue. Symptoms often start small but can get worse. You might notice that your turn signals don't cancel after a turn, or they don't activate at all. In some cases, the signals might even flash in the opposite direction of what you selected. Because this switch also controls other systems, you could also experience problems with your headlights, high beams, or windshield wipers not working correctly.
Safety First: A Faulty Switch is a Safety Hazard
Driving without reliable turn signals is illegal and dangerous. Other drivers can't predict your intentions, which greatly increases the risk of an accident. If your brake lights are also routed through the switch, a failure could mean your brake lights stop working, which is a critical safety failure. It's best to get this part replaced as soon as you notice a problem.
Common Symptoms of a Bad Multifunction Switch
- Turn signals don't work, or only work intermittently.
- Signal stays on and won't cancel, or blinks for the wrong direction.
- Headlights or high beams won't turn on or switch properly.
- Windshield wipers and washer functions fail. 🎬 Watch this video to diagnose why your signals aren't working.
- Hazard lights don't work, even if the turn signals do (or vice-versa).
Choosing the Right Aftermarket Replacement
You don't need to go to the dealer for a quality replacement. Aftermarket brands offer good alternatives, often at a much better price. Here’s a look at the brands available:
- Standard Ignition (Standard Motor Products): Often considered a top-tier aftermarket brand, Standard parts are trusted by professional technicians for their quality and durability. They focus on meeting or exceeding original factory specifications, making them a reliable choice for a long-lasting repair.
- Rostra Powertrain: Rostra is a known name in the aftermarket, particularly for electronic components like cruise control systems and transmission parts. While not as widely discussed for multifunction switches as Standard, they are generally seen as a viable mid-range option.
- Replacement: This is typically a budget-friendly or house brand. It will get the job done and is a cost-effective solution to restore function. While it may not have the same long-term durability reputation as premium brands, it's a practical choice for getting your car safely back on the road.
Cost of Replacing a Chrysler Sebring Turn Signal Switch
The cost can vary depending on the part brand and whether you do the work yourself. The replacement is a straightforward job for many DIY mechanics.
| Cost Category | Estimated Price Range |
|---|---|
| New Aftermarket Part | $48 - $152 |
| Shop Labor | $107 - $157 |
| Total Professional Replacement | $155 - $309+ |
Frequently Asked Questions
Can I replace the turn signal switch myself?
Yes, this is a very DIY-friendly repair for most 2001-2010 Sebring models. The job typically involves removing the plastic covers around the steering column (usually with a few Phillips screws), unplugging the old switch, and plugging in the new one. On most Sebrings, you do not need to remove the steering wheel or airbag, making it a relatively safe and simple task that can be done in under an hour.
🎬 See this step-by-step walkthrough for replacing your turn signal switch.Do I need to disconnect the battery?
Yes. It is always recommended to disconnect the negative battery terminal before working on any part of your vehicle's electrical system. This prevents any accidental short circuits that could damage the new part or other components.
Is there a recall for the turn signal switch on my Sebring?
My search found no specific recalls issued by the NHTSA for the turn signal or multifunction switch on the 2001-2010 Chrysler Sebring. While other electrical recalls exist for these model years, they do not pertain to this specific part.
What's the difference between a turn signal switch and a multifunction switch?
For modern cars like your Sebring, the terms are often used interchangeably. The 'turn signal switch' is the lever you move, but it's part of a larger 'multifunction switch' assembly that controls headlights, wipers, and more. When you buy the part, you are buying the entire multifunction unit.
Helpful Videos
Technical Specifications
OEM Part Numbers: 68015101AA 68015101AB 68015101AC 68015101AD 68015101AE 68015101AF 68015101AG
This is a column-mounted multifunction combination switch. It controls the turn signals, headlights (high/low beam), and may include controls for windshield wipers and cruise control depending on the vehicle's specific trim and options. It connects via a multi-pin wiring harness.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Chrysler Sebring:
- 🎬 Helpful Videos
- 🛍️ Shop This Part
- Is Your Sebring's Turn Signal Switch Failing?
- Safety First: A Faulty Switch is a Safety Hazard
- Common Symptoms of a Bad Multifunction Switch
- Choosing the Right Aftermarket Replacement
- Cost of Replacing a Chrysler Sebring Turn Signal Switch
- Frequently Asked Questions
- 🎟️ Get 5% Off