GMC Canyon 2004-2008 Fuel Injector Replacement Guide
Having engine trouble with your Canyon? It might be time for new fuel injectors.
- Common symptoms of failure include rough idle, engine misfires, poor gas mileage, and a check engine light.
- It is strongly recommended to replace all fuel injectors at the same time to ensure reliability and balanced engine performance.
- Aftermarket brands like Delphi and Standard Ignition offer a good balance of quality and value for this repair.
- If you smell raw fuel, stop driving immediately. An external fuel leak is a serious fire risk.
Is Your GMC Canyon's Fuel Injector Failing?
A bad fuel injector can cause problems that range from annoying to serious. Because the injector's job is to deliver a precise amount of fuel, any failure can throw off your engine's performance. 🎬 Watch: 11 telltale signs your fuel injector is going bad Symptoms often get worse over time, so it's best to address them before they cause more damage.
Choosing the Right Aftermarket Fuel Injector
When replacing fuel injectors on your Canyon, you have options outside of the expensive dealership parts. Aftermarket brands offer a range of quality and price. It's a good practice to replace all injectors at once, especially on an older truck. When one fails, others are often not far behind.
Brand Quality Tiers
- High-Tier Aftermarket (Delphi): Delphi is a well-respected brand, often considered an original equipment (OE) supplier for many manufacturers. They are known for robust and reliable injectors. Choosing a brand like Delphi often means you are getting a part that meets or exceeds the original factory specifications.
- Mid-Tier Aftermarket (Standard Ignition): Standard Ignition (also known as Standard Motor Products) is a trusted name in the aftermarket. They produce new injectors that are tested to match OE performance in flow rates and spray patterns. While generally reliable, like any aftermarket part, there is a small chance of receiving a faulty unit out of the box.
- Value-Tier (GBR Fuel Injection): GBR, or GB Remanufacturing, specializes in remanufactured fuel injectors. This can be a cost-effective option, but the quality can be inconsistent. Some users have good experiences, while others report premature failures where the injector gets stuck open, which can lead to serious engine problems. This is a budget-friendly choice, but it comes with higher risk compared to new injectors.
Cost of Fuel Injector Replacement (2004-2008 GMC Canyon)
| Part Type | Estimated Part Cost (Single Injector) | Notes |
|---|---|---|
| New OEM (Dealer) | $145 - $150+ | Highest cost, original factory part. |
| New Aftermarket | $56.80 - $116.13 | Good balance of quality and price. Brands like Delphi and Standard Ignition fit here. |
| Remanufactured | $35 - $55 | Lowest cost, but quality can be inconsistent. |
| Shop Labor | $252 - $805 | Labor costs can vary widely by location and whether other services are performed. | 🎬 See this walkthrough on replacing injectors and the intake manifold
Frequently Asked Questions
Should I replace all my fuel injectors at once?
Yes, it is highly recommended. The injectors in your truck have all operated for the same amount of time under the same conditions. If one has failed, the others are likely nearing the end of their service life as well. Replacing them all at once saves you from having to do the same repair again in the near future.
What are signs of a fuel injector leaking externally?
The most obvious sign is a strong smell of raw gasoline around the engine bay. You might also see wetness or fuel pooling on the engine near the fuel rail. If you see or smell this, do not drive the vehicle, as it is a serious fire hazard.
What is the difference between a dirty injector and a failed injector?
A dirty or clogged injector can often cause rough idling, poor fuel economy, and hesitation. A failed injector can have an electrical problem or be physically broken, causing a constant misfire or, if stuck open, dumping excessive fuel into the cylinder. This can lead to oil dilution, where gas mixes with your engine oil and can cause severe engine damage.
🎬 Learn how to test if an injector has failed completelyAre there any recalls for fuel injectors on the 2004-2008 GMC Canyon?
No, searches of the NHTSA database did not show any fuel injector recalls specifically for the 2004-2008 GMC Canyon model years. Recalls for fuel system components on other model years exist, but they do not apply to this generation.
Helpful Videos
Technical Specifications
OEM Part Numbers: 12589465 25345324 25358575 171146145
The 2004-2008 GMC Canyon uses multiport fuel injectors. The specific part number may vary depending on your engine size (2.8L I4, 2.9L I4, 3.5L I5, or 3.7L I5). Always verify fitment with your vehicle's specific details before ordering.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- GMC Canyon: